MikroTik

Posted: **Thu Sep 03, 2015 7:56 pm**

Hi guys,

I know how to confgure access port (Untagged VLAN) on RB250GS, and I know how to configure Trunk port (Tagged VLANS), but can anybody tell me how to configura on por one Untagged VLAN (100) and for example 5 Tagged VLAN's (501,502,503,504,505) ?

Tab VLAN:
Vlan Mode :
Default VLAN ID:
Force VLAN ID:
Vlan Header:

Tab VLANs:
VLAN100:
VLAN501:
VLAN502:
VLAN503:
VLAN504:
VLAN505:

Thank you
Boris

Posted: **Fri Sep 04, 2015 9:41 am**

There is no way to configure it with RB250GS.
But just to mention - it is possible with RB260GS/RB260GSP.

Posted: **Fri Sep 04, 2015 10:50 am**

Is it possible in RouterOS? I have seen mixed information.

Thanks

Posted: **Fri Sep 04, 2015 2:36 pm**

It is possible in RouterOS and CRS switches.

So called hybrid VLAN port configuration is described in CRS Port Based VLAN example #2
http://wiki.mikrotik.com/wiki/Manual:CR ... Based_VLAN

Here is hybrid port example using RouterOS bridges and VLAN interfaces.
The setup is similar to CRS Port Based VLAN example #2:
//ether1 is Trunk port
//ether2 is Hybrid port with vlan200 untagged
//ether3 is Hybrid port with vlan300 untagged
//ether4 is Hybrid port with vlan400 untagged

/interface vlan
add name=ether1-vlan200 interface=ether1 vlan-id=200
add name=ether1-vlan300 interface=ether1 vlan-id=300
add name=ether1-vlan400 interface=ether1 vlan-id=400

add name=ether2-vlan300 interface=ether2 vlan-id=300
add name=ether2-vlan400 interface=ether2 vlan-id=400

add name=ether3-vlan200 interface=ether3 vlan-id=200
add name=ether3-vlan400 interface=ether3 vlan-id=400

add name=ether4-vlan200 interface=ether4 vlan-id=200
add name=ether4-vlan300 interface=ether4 vlan-id=300


/interface bridge
add name=bridge-vlan200
add name=bridge-vlan300
add name=bridge-vlan400


/interface bridge port
add bridge=bridge-vlan200 interface=ether1-vlan200
add bridge=bridge-vlan200 interface=ether2
add bridge=bridge-vlan200 interface=ether3-vlan200
add bridge=bridge-vlan200 interface=ether4-vlan200

add bridge=bridge-vlan300 interface=ether1-vlan300
add bridge=bridge-vlan300 interface=ether2-vlan300
add bridge=bridge-vlan300 interface=ether3
add bridge=bridge-vlan300 interface=ether4-vlan300

add bridge=bridge-vlan400 interface=ether1-vlan400
add bridge=bridge-vlan400 interface=ether2-vlan400
add bridge=bridge-vlan400 interface=ether3-vlan400
add bridge=bridge-vlan400 interface=ether4

Posted: **Sat Sep 05, 2015 11:00 am**

Huh... good answer after I spend hours to find solution. Never mind, I am satisfied with answer and explanation how to do that on RouterOS.

Thank you all for your time

Regards

MikroTik

Tagged abd Untagged VLAN on same port RB250GS

Tagged abd Untagged VLAN on same port RB250GS

Re: Tagged abd Untagged VLAN on same port RB250GS

Re: Tagged abd Untagged VLAN on same port RB250GS

Re: Tagged abd Untagged VLAN on same port RB250GS

Re: Tagged abd Untagged VLAN on same port RB250GS