Community discussions

MikroTik App
Topic Author
Posts: 28
Joined: Tue Mar 18, 2014 12:10 am
Location: United Kingdom

RB750r2 mipsbe simple queue not working v6.33.1

Sat Nov 21, 2015 3:59 pm

I am using a one simple queue list where i have restricted my sisters laptop via the DHCP static IP for target address, No traffic shows up on the Queue and when shes browsing/downloading.
When i go to Torch in the simple queue list and go to my ether1-gateway then press start it works but if i close down the session then it stop limiting her and gives her a full up and download speed.

RB750r2 mipsbe using v6.33.1

[admin@GW1] /queue simple> print

Flags: X - disabled, I - invalid, D - dynamic
0 name="queue1" target= parent=none packet-marks="" priority=8/8 queue=default-small/defa
max-limit=1M/4M burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s

Correct me if im doing something wrong :?
RouterBoard RB750R2, RouterOS Level 4
ISP: Zen Internet via VDSL 2 > 74.68Mb Down / 17.84Mb Up
User avatar
MikroTik Support
MikroTik Support
Posts: 1428
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RB750r2 mipsbe simple queue not working v6.33.1

Mon Nov 23, 2015 8:19 am

Most likely you have enabled FastTrack. That is whole point of it - avoid queues and firewall rules.

Disable firewall fasttrack rule, reboot router and now it should work.

Who is online

Users browsing this forum: No registered users and 87 guests