Community discussions

MikroTik App
 
becs
MikroTik Support
MikroTik Support
Topic Author
Posts: 499
Joined: Thu Jul 07, 2011 8:26 am

SwOS version 1.15 released

Mon Apr 25, 2016 12:15 pm

SwOS version 1.15 released
http://www.mikrotik.com/download
What's new in 1.15:

*) new poe-out sw version 2.18 - fix unintended poe-out state change;
*) new poe-out sw version 2.15 - increase initial power-on delay 1s->4s;
*) report correct uptime in neighbour discovery even after 18 hours;
*) report correct ifAdminStatus via SNMP;
*) report SNMP ifOperStatus Up for SFP port only when link is present;
*) extended SNMP contact info fields to 32 symbols;
*) added IVL option (independent learning) to VLAN entries;
*) report negative temperature properly;
*) report tx/rx power for SFP interface;
*) name can be assigned to each port;
 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1222
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: SwOS version 1.15 released

Mon Apr 25, 2016 7:47 pm

*) name can be assigned to each port;
Wonderful. Thank you!
 
User avatar
chechito
Forum Guru
Forum Guru
Posts: 2989
Joined: Sun Aug 24, 2014 3:14 am
Location: Bogota Colombia
Contact:

Re: SwOS version 1.15 released

Mon Apr 25, 2016 8:53 pm

omg

unbelievable sw os is alive !!!!!
 
User avatar
isolnet
newbie
Posts: 45
Joined: Sat Jan 30, 2016 7:28 am
Location: India

Re: SwOS version 1.15 released

Mon Apr 25, 2016 9:05 pm

Nice ...
 
zyzelis
Member Candidate
Member Candidate
Posts: 213
Joined: Sun Apr 08, 2012 9:25 pm

Re: SwOS version 1.15 released

Tue Apr 26, 2016 10:04 am

SwOS version 1.15 released
http://www.mikrotik.com/download
What's new in 1.15:

*) name can be assigned to each port;
unfortunately i can't check this feature, because after upgrade i am not able to connect to 260GS via web interface, the browser just gets the "download" file
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2394
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: SwOS version 1.15 released

Tue Apr 26, 2016 10:18 am

After more than a year came a new version SwOS. Unexpected ! Thanks :)
 
Ljubo
just joined
Posts: 21
Joined: Thu Apr 24, 2014 10:57 am

Re: SwOS version 1.15 released

Tue Apr 26, 2016 11:48 am

After the upgrade can not see SFP parameters and the SFP tab I get the message
INTERNAL ERROR:TypeError: Object doesn't support property or method 'log10'
 
becs
MikroTik Support
MikroTik Support
Topic Author
Posts: 499
Joined: Thu Jul 07, 2011 8:26 am

Re: SwOS version 1.15 released

Tue Apr 26, 2016 11:53 am

After the upgrade can not see SFP parameters and the SFP tab I get the message
INTERNAL ERROR:TypeError: Object doesn't support property or method 'log10'
Did you upgrade from SwOS v1.14 or older version?
 
Ljubo
just joined
Posts: 21
Joined: Thu Apr 24, 2014 10:57 am

Re: SwOS version 1.15 released

Tue Apr 26, 2016 11:55 am

Upgraded from v1.14
after reset to default error is still there
INTERNAL ERROR:TypeError: Object doesn't support property or method 'log10'
Image
Last edited by Ljubo on Wed Apr 27, 2016 9:55 am, edited 2 times in total.
 
zyzelis
Member Candidate
Member Candidate
Posts: 213
Joined: Sun Apr 08, 2012 9:25 pm

Re: SwOS version 1.15 released

Wed Apr 27, 2016 8:02 am

SwOS version 1.15 released
http://www.mikrotik.com/download
What's new in 1.15:

*) name can be assigned to each port;
unfortunately i can't check this feature, because after upgrade i am not able to connect to 260GS via web interface, the browser just gets the "download" file
Now, after powercycle it works.
Thank you Mikrotik for port naming in the swos :)
 
becs
MikroTik Support
MikroTik Support
Topic Author
Posts: 499
Joined: Thu Jul 07, 2011 8:26 am

Re: SwOS version 1.15 released

Wed Apr 27, 2016 11:01 am

Upgraded from v1.14
after reset to default error is still there
INTERNAL ERROR:TypeError: Object doesn't support property or method 'log10'
Image
Powercycle also should remove this error.
 
Ljubo
just joined
Posts: 21
Joined: Thu Apr 24, 2014 10:57 am

Re: SwOS version 1.15 released

Wed Apr 27, 2016 1:56 pm

Upgraded from v1.14
after reset to default error is still there
INTERNAL ERROR:TypeError: Object doesn't support property or method 'log10'
Image
Powercycle also should remove this error.
Powercycle also does not help
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: SwOS version 1.15 released

Wed Apr 27, 2016 3:35 pm

Upgraded from v1.14
after reset to default error is still there
INTERNAL ERROR:TypeError: Object doesn't support property or method 'log10'
Image
I also experiencing the same situation.

It's occurring only in Internet Explorer.
 
becs
MikroTik Support
MikroTik Support
Topic Author
Posts: 499
Joined: Thu Jul 07, 2011 8:26 am

Re: SwOS version 1.15 released

Wed Apr 27, 2016 3:52 pm

Upgraded from v1.14
after reset to default error is still there
INTERNAL ERROR:TypeError: Object doesn't support property or method 'log10'
Image
I also experiencing the same situation.

It's occurring only in Internet Explorer.
Try to clear web browser's cache
 
InoX
Forum Guru
Forum Guru
Posts: 1966
Joined: Tue Jan 09, 2007 6:44 pm

Re: SwOS version 1.15 released

Wed Apr 27, 2016 5:05 pm

I didnt know that people still use IE...
 
Ljubo
just joined
Posts: 21
Joined: Thu Apr 24, 2014 10:57 am

Re: SwOS version 1.15 released

Wed Apr 27, 2016 8:58 pm

I didnt know that people still use IE...
After the upgrade is from strange reason stopped work SFP module.
By changing the SFP module started working and regardless of IE.

If you use windows OS in the business environment only reasonable to use IE.
If you have a suggestion for something useful that is not upgraded 2 times a week, I'm interested.
And as we know all web browsers are useless garbage.
Then I choose the least evil with the least problems.
 
raindeer
just joined
Posts: 5
Joined: Wed Apr 27, 2016 8:50 pm

Re: SwOS version 1.15 released

Wed Apr 27, 2016 9:03 pm

I didnt know that people still use IE...
After the upgrade is from strange reason stopped work SFP module.
By changing the SFP module started working and regardless of IE.

If you use windows OS in the business environment only reasonable to use IE.
If you have a suggestion for something useful that is not upgraded 2 times a week, I'm interested.
And as we know all web browsers are useless garbage.
Then I choose the least evil with the least problems.

Hi bro can you take a look at my other topic , maybe you can help , thanks
 
InoX
Forum Guru
Forum Guru
Posts: 1966
Joined: Tue Jan 09, 2007 6:44 pm

Re: SwOS version 1.15 released

Thu Apr 28, 2016 2:14 am

Then I choose the least evil with the least problems.
But you choose the worst evil with the most problems...updates are not a problem, are a welcome solution.
 
leonset
Member Candidate
Member Candidate
Posts: 256
Joined: Wed Apr 01, 2009 9:09 pm

Re: SwOS version 1.15 released

Thu Apr 28, 2016 2:33 pm

Very needed update!! Thanks!!
 
mpreissner
Member
Member
Posts: 357
Joined: Tue Mar 11, 2014 11:16 pm
Location: Columbia, MD

Re: SwOS version 1.15 released

Thu Apr 28, 2016 2:43 pm

Can we get https support added to the web interface? And maybe a RADIUS client for centralized authentication? The lack of even minimal security for the administrative interface is troubling...and it shouldn't be hard to correct either of these issues...
 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1222
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: SwOS version 1.15 released

Thu Apr 28, 2016 10:54 pm

Can we get https support added to the web interface? And maybe a RADIUS client for centralized authentication? The lack of even minimal security for the administrative interface is troubling...and it shouldn't be hard to correct either of these issues...
If you think that adding support for certificate management and ssl to a switch chip that is barely able to handle plain http is a trival task, then it is certainly easy.
BTW, you have the possibility to restrict administrative access to a IP range. Use a router to secure the access to that range as you wish.
 
mrtester

Re: SwOS version 1.15 released

Fri Apr 29, 2016 12:50 am

Cool. In past we did reboot our switches periodically because of this PoE-OUT issue. Now we can forget about it ;)
 
leonset
Member Candidate
Member Candidate
Posts: 256
Joined: Wed Apr 01, 2009 9:09 pm

Re: SwOS version 1.15 released

Wed May 04, 2016 9:47 am

Same thing here. Upgraded 3 units, two of them are ok, but the third one keeps downloading a file every time i try to get into the unit. Tried power cycle, different browsers, clear cache, reset the switch with the front panel button and the jumper... The reset did change the device IP to default 192.168.88.1.

Is there any way to recover the unit?

Thanks
SwOS version 1.15 released
http://www.mikrotik.com/download
What's new in 1.15:

*) name can be assigned to each port;
unfortunately i can't check this feature, because after upgrade i am not able to connect to 260GS via web interface, the browser just gets the "download" file
 
InoX
Forum Guru
Forum Guru
Posts: 1966
Joined: Tue Jan 09, 2007 6:44 pm

Re: SwOS version 1.15 released

Wed May 04, 2016 8:09 pm

Reinstall SwOS firmware
It is possible to upload and install SwOS firmware using BOOTP. This example shows how to reinstall SwOS using RouterOS.

Icon-warn.png
Warning: Each RouterBoard switch series have their own firmware which cannot be installed on other series models! In case wrong installation is accidentally done, correct firmware has to be reinstalled following these instructions.

RB250GS supports SwOS v1.0 and newer.
RB260GS supports SwOS v1.7 and newer.
RB260GSP supports SwOS v1.11 and newer.

Configure IP address and DHCP server with BOOTP enabled on the installation router.
/ip address
add address=10.0.0.1/24 interface=ether1
/ip pool
add name=dhcp_pool1 ranges=10.0.0.2-10.0.0.254
/ip dhcp-server
add interface=ether1 address-pool=dhcp_pool1 bootp-support=dynamic disabled=no
/ip dhcp-server network
add address=10.0.0.0/24 gateway=10.0.0.1
Upload new SwOS firmware file to the router filesystem.
[admin@MikroTik] /file> print
# NAME TYPE SIZE CREATION-TIME
0 swos-rb260-1.14.lzb .lzb file 38142 sep/02/2014 08:40:17
Configure TFTP server.
/ip tftp
add ip-addresses=10.0.0.0/24 real-filename=swos-rb260-1.14.lzb read-only=yes allow=yes
Hold the RESET button of the switch when starting it.
After few seconds ACT LED will start blinking. Wait till ACT LED blinks twice as fast and release RESET button.
Make ethernet connection between the switch Port1 and ethernet port you configured DHCP server on. After few seconds new firmware should be successfully uploaded and installed.

http://wiki.mikrotik.com/wiki/SwOS
 
CWDylan
just joined
Posts: 14
Joined: Wed Nov 25, 2015 4:24 pm

Re: SwOS version 1.15 released

Thu May 05, 2016 4:38 pm

Just started upgrading a few of switches from 1.14 that are known to have poe issues remotely and on my 3rd one the firmware didn't upgrade properly showed me a bunch of text on a white screen (looked like code as I noticed it looked like some html code was in there) and then I lost access and unfortunately didn't get a screenshot in time. I will have to go to the site to check out the switch see if it just needs a reboot or replaced for now.
 
becs
MikroTik Support
MikroTik Support
Topic Author
Posts: 499
Joined: Thu Jul 07, 2011 8:26 am

Re: SwOS version 1.15 released

Thu May 05, 2016 5:18 pm

Just started upgrading a few of switches from 1.14 that are known to have poe issues remotely and on my 3rd one the firmware didn't upgrade properly showed me a bunch of text on a white screen (looked like code as I noticed it looked like some html code was in there) and then I lost access and unfortunately didn't get a screenshot in time. I will have to go to the site to check out the switch see if it just needs a reboot or replaced for now.
Such failure can happen due to interruption during firmware upgrade.
You will have to reinstall your switch using BOOTP reinstallation method.
 
CWDylan
just joined
Posts: 14
Joined: Wed Nov 25, 2015 4:24 pm

Re: SwOS version 1.15 released

Thu May 05, 2016 7:27 pm

Hi becs,

Thank you for the quick response I did get to reboot the RB260 and it came back normally.
 
mistry7
Forum Guru
Forum Guru
Posts: 1480
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: SwOS version 1.15 released

Thu May 26, 2016 10:53 pm

Does anyone have problems with powering SXT-AC with RB260GSP on 1.15?
SXT Led only blinking, RB260 says about 70mA SXT die not boot, poe always on or auto does not matter,
Powering Netbox works, SXT with POE injector works..
Any Idears?

mistry7
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1616
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: SwOS version 1.15 released

Thu Jun 02, 2016 3:08 pm

Version 1.16 of SwOS has been released:
http://forum.mikrotik.com/viewtopic.php?f=21&t=109018

Who is online

Users browsing this forum: andriys, pedroush and 28 guests