Community discussions

MikroTik App
 
Toby7
Member Candidate
Member Candidate
Topic Author
Posts: 100
Joined: Thu Jan 05, 2012 12:53 am

PPPoE IPv6 address / Dual stack

Mon Oct 03, 2016 10:19 pm

Hi,

my local ISP provides a dual stack configuration for my internet access by ADSL. I wann test this but I am not able to get a IPv6 address. The PPPoE connection is running fine and there I get a valid IPv4 address. Now the question is how to a IPv6 address? I set up an DHCPv6 Client on the PPPoE connection but it is stuck in the "searching" status.

Before I did use an FritzBox to verify the IPv6 dual stack configuration and there it simply works. Ipv4 and v6 addresses are received.

Do you have any idea? Is it necessary to set up an own PPPoE connection for the IPv6 address or can I use one for both?

Thanks!
 
mbeauverd
just joined
Posts: 18
Joined: Mon Oct 03, 2016 10:46 am

Re: PPPoE IPv6 address / Dual stack

Tue Oct 04, 2016 11:17 am

I had to do so on my side.
Ipv6_Client.jpg
It is working fine :)
Ipv6_Client2.jpg
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: brg3466, martinclaro and 111 guests