Community discussions

MikroTik App
 
lekozs
newbie
Topic Author
Posts: 49
Joined: Wed Aug 30, 2006 12:49 pm

CRS125 multiple uplink ports

Tue Jan 31, 2017 11:05 pm

Hello!

CRS-newbie here...! :? :(

I have read all the examples in the wiki ( http://wiki.mikrotik.com/wiki/Manual:CR ... _Isolation )
... I need something like what is in the example with ports ether5 and ether6 and their uplink port is ether2...
However, I would like to have MORE than one uplink port for those isolated ports i.e. ether1 AND ether2 to act as a uplink port...
Is it possible with this CRS125-24G-1S-RM switch...?
This kind of config is easily achievable with various TP-Link, Allied Telesis... switches... on ther respective web interfaces (a few click on checkboxes and all is ready...!)
I drew a simple Network Diagram... I hope it clarifies my goal...

Image
 
User avatar
rushlife
Member Candidate
Member Candidate
Posts: 244
Joined: Thu Nov 05, 2015 12:30 pm

Re: CRS125 multiple uplink ports

Thu Sep 08, 2022 11:36 am

+1
Hi guys.
This is pretty much the same scenario as I have.
I need two uplinks for the same switch which both ends in one switch on other side.
How I suppose to do that?

Thx folks
 
Dude2048
Member Candidate
Member Candidate
Posts: 212
Joined: Thu Sep 01, 2016 4:04 pm

Re: CRS125 multiple uplink ports

Thu Sep 08, 2022 3:55 pm

 
User avatar
chechito
Forum Guru
Forum Guru
Posts: 2990
Joined: Sun Aug 24, 2014 3:14 am
Location: Bogota Colombia
Contact:

Re: CRS125 multiple uplink ports

Thu Sep 08, 2022 6:19 pm

in CRS 1xx and 2xx IEEE802.3ad and IEEE802.1ax compatible Link Aggregation Control Protocol is not supported

https://help.mikrotik.com/docs/pages/vi ... s-Trunking

https://help.mikrotik.com/docs/pages/vi ... s-Trunking

Who is online

Users browsing this forum: Amazon [Bot], Bing [Bot], scoobyn8 and 49 guests