Community discussions

MikroTik App
 
tekkninja
just joined
Topic Author
Posts: 7
Joined: Thu Oct 26, 2017 6:59 pm

R11e-LTE AT Commands list

Fri Dec 22, 2017 12:46 pm

Im looking for a referance for the AT commands that can be used on the R11e-LTE modem.Specifically im looking for a MONI like command to get info of neighboring towers. We intend to lock clients onto other towers when the closest one is congested.

Moni comand ive found for other Modems doesnt work on the R11e-LTE:
3.5.5.1.25 #MONI - Cell Monitor
#MONI - Cell Monitor
AT#MONI[=
[<number>]]
Set command sets one cell out of seven, in a neighbour of the serving cell
including it, from which extract GSM-related informations.
Parameter:
<number>
0..6 - it is the ordinal number of a cell, in a neighbour of the serving cell
(default 0, serving cell).
7 - it is a special request to obtain GSM-related informations from the
whole set of seven cells in the neighbour of the serving cell.
Note: issuing AT#MONI<CR> is the same as issuing the Read command.
Note: issuing AT#MONI=<CR> is the same as issuing the command
AT#MONI=0<CR>.
AT#MONI? Read command reports the following GSM-related informations for
selected cell and dedicated channel (if exists).
a) When extracting data for the serving cell and the network name is
known the format is:
#MONI: <netname> BSIC:<bsic> RxQual:<qual> LAC:<lac> Id:<id>
ARFCN:<arfcn> PWR:<dBm> dBm TA: <timadv>
b) When the network name is unknown, the format is:
#MONI: Cc:<cc> Nc:<nc> BSIC:<bsic> RxQual:<qual> LAC:<lac>
Id:<id> ARFCN:<arfcn> PWR:<dBm> dBm TA: <timadv>
c) When extracting data for an adjacent cell, the format is:
#MONI: Adj Cell<n> [LAC:<lac> Id:<id>] ARFCN:<arfcn>
PWR:<dBm> dBm
where:
<netname> - name of network operator
<cc> - country code
<nc> - network operator code
<n> - progressive number of adjacent cell
<bsic> - base station identification code
<qual> - quality of reception
0..7
<lac> - localization area code
<id> - cell identifier
<arfcn> - assigned radio channel
<dBm> - received signal strength in dBm
<timadv> = timing advance
https://www.sparkfun.com/datasheets/Cel ... ide_r0.pdf

There is little to no information on these modems available.
 
User avatar
antonsb
MikroTik Support
MikroTik Support
Posts: 385
Joined: Sun Jul 24, 2016 3:12 pm
Location: Riga, Latvia

Re: R11e-LTE AT Commands list

Sat Dec 23, 2017 12:12 am

There is different command set on R11e-LTE cards. Currently we don't have complete reference guide published out yet.
Scan is running in background at all times, latest RC releases should print some usefull info in logs.
 
ciconde
just joined
Posts: 1
Joined: Sun Feb 12, 2023 11:19 am

Re: R11e-LTE AT Commands list

Sun Feb 12, 2023 11:23 am

Do we have a reference guide or at least any partial document?

Thanks
 
dot02
Member Candidate
Member Candidate
Posts: 108
Joined: Tue Jun 15, 2021 1:23 am

Re: R11e-LTE AT Commands list

Tue Feb 28, 2023 5:18 pm

Yes I would be interested too!
 
User avatar
krafg
Forum Guru
Forum Guru
Posts: 1020
Joined: Sun Jun 28, 2015 7:36 pm

Re: R11e-LTE AT Commands list

Wed Mar 15, 2023 1:11 am

+1 for documentation. It is truly helpfully for troubleshooting.

Regards.
 
rolo95
newbie
Posts: 32
Joined: Thu Jun 16, 2022 5:19 pm

Re: R11e-LTE AT Commands list

Wed Mar 22, 2023 5:31 pm

There is different command set on R11e-LTE cards. Currently we don't have complete reference guide published out yet.
Scan is running in background at all times, latest RC releases should print some usefull info in logs.
I guess 5 years is more than enough to roll out a complete reference guide for the R11e-LTE card.

any news ?
 
User avatar
Amm0
Forum Guru
Forum Guru
Posts: 3169
Joined: Sun May 01, 2016 7:12 pm
Location: California

Re: R11e-LTE AT Commands list

Wed Mar 22, 2023 6:12 pm

AT command sets are often protected by NDAs, so I suspect Mikrotik may be legally bound to not publish them.

Google may be your best bet to find any commands. What specifically are you trying to do with AT that isn't already in the UI?

Who is online

Users browsing this forum: No registered users and 20 guests