ok, I found a way but I am not sure if this is the best approach!
add 5 VLANS on sfp1
add 5 bridges
add port to bridge
- 192.168.01.0/24 to br-admin
- 192.168.10.0/24 to br-vlan10
add dhcp server and pool
- 192.168.50.0/24 to br-vlan50
Cisco Switch is connected via SFP1 and vlans are available on the switches.
It seems to be working but as i mentioned, I am not sure if this is the best configuration.
Next step would be to connect the VLANS to the internet over ether1 and to route between some vlans.
Can someone check my way, or is there a more efficient way?