Community discussions

 
User avatar
genesispro
Member Candidate
Member Candidate
Posts: 114
Joined: Fri Mar 14, 2014 12:33 pm

Re: v6.43rc [release candidate] is released!

Fri Jun 08, 2018 11:22 am

I just found another "issue" with the latest version 6.43rc23 the custom default config that I have using the branding tool gets erased.
It resets to mikrotik's defaults.
Even after I downgrade to stable 6.42.3 and reset it again the default configuration of mikrotik comes up... with the previous rc that rc23 (don't remember the number) it wasn't affected.
I hope that it will be fixed before the 6.43 is out!
 
z1022
just joined
Posts: 13
Joined: Wed Jun 06, 2018 5:51 pm

Re: v6.43rc [release candidate] is released!

Sat Jun 09, 2018 1:08 pm

rc23 still have high ping time in hAP ac².
 
User avatar
Xymox
Member
Member
Posts: 338
Joined: Thu Jan 21, 2010 5:04 pm
Location: Phoenix, Arizona US
Contact:

Re: v6.43rc [release candidate] is released!

Sun Jun 10, 2018 11:03 am

Ive lost control of LEDs from scripting. I can control them via terminal.

/system leds set leds=user-led type=off 3
/system leds set leds=user-led type=on 3

These work fine from terminal but do not work in a script.
 
netwpl
just joined
Posts: 19
Joined: Fri Jun 22, 2012 8:09 pm

Re: v6.43rc [release candidate] is released!

Mon Jun 11, 2018 10:50 am

tested winbox auth. with radius (mschapv2) interworking. works like a charm! :)
 
k3dt
newbie
Posts: 27
Joined: Tue Jul 17, 2007 3:37 pm
Location: Czech Republic

Re: v6.43rc [release candidate] is released!

Mon Jun 11, 2018 5:00 pm

Plaintext password in API login? WTF WHY? api-ssl is SLOW as hell.. please change your mind.. its a step backward.
 
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1325
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.43rc [release candidate] is released!

Tue Jun 12, 2018 3:49 pm

Version 6.43rc27 has been released.

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

MAJOR CHANGES IN v6.43:
----------------------
!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required);
----------------------


Other changes in this release:

*) dhcpv4-client - fixed DHCP client that was stuck on invalid state;
*) dhcpv4-server - fixed DHCP server that was stuck on invalid state;
*) health - changed "PSU-Voltage" to "PSU-State" for CRS328-4C-20S-4S+;
*) health - fixed incorrect PSU index for CRS328-4C-20S-4S+;
*) ike1 - purge both SAs when timer expires;
*) ipsec - use monotonic timer for SA lifetime check;
*) led - added "dark-mode" functionality for hEX S devices;
*) lte - added additional ID support for SIM7600 modem;
*) lte - added support for Quanta 1k6e modem;
*) lte - improved r11e-LTE and r11e-LTE-US dialling process;
*) lte - improved readings of info command results for the SXT LTE;
*) lte - improved stability of USB LTE interface detection process;
*) ntp - allow to specify link-local address as NTP server;
*) ppp - added support for additional ID for E3531 modem;
*) snmp - added remote CAP count OID for CAPsMAN;
*) snmp - fixed readings for CAPsMAN slave interfaces;
*) usb - fixed power-reset for hAP ac^2 devices;
*) usb - properly detect USB 3.0 flash on RBM33G when jumper is removed;
*) userman - improved unique username generation process when adding batch of users;
*) w60g - added distance measurement (CLI only);
*) w60g - improved link stability;
*) w60g - improved maximum link distance;
*) wireless - improved Nv2 reliability on ARM devices;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as expected or after crash.

Note that release candidate versions are published strictly for testing purposes and should not be used on production routers.
 
Tris
just joined
Posts: 2
Joined: Thu Jun 07, 2018 11:37 am

Re: v6.43rc [release candidate] is released!

Tue Jun 12, 2018 5:21 pm

The issue I noted in #298 is still occurring in rc27. Is this the best place to raise possible RC bugs, or should I email support?
 
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1325
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.43rc [release candidate] is released!

Tue Jun 12, 2018 11:13 pm

We are aware about this problem and will try to resolve it as soon as possible.

This is MikroTik users forum. If you want to discuss configuration, changes, etc. with other users, then use forum. If you are sure that there is a problem, then contact support@mikrotik.com directly.
 
Ulum
just joined
Posts: 2
Joined: Wed Jun 13, 2018 10:32 am

Re: v6.43rc [release candidate] is released!

Wed Jun 13, 2018 10:57 am

Bug in 6.43rc23:
  1. Upgrade from previous version to 6.43rc23 when you have /ip ipsec peer proposal with hash-algorithm=sha512
  2. Open this proposal in Winbox. You will see that in Winbox it have checked md5 and sha1, but in the export it have sha512
  3. Set hash algorithm to sha512 through Winbox, now autosup file starts generating
Is this bug fixed in 6.43rc27?
 
blingblouw
Member Candidate
Member Candidate
Posts: 236
Joined: Wed Aug 25, 2010 9:43 am

Re: v6.43rc [release candidate] is released!

Wed Jun 13, 2018 11:50 am

I am still experiencing a problem with the WAP60 on this firmware.

Both client & AP running latest release.

Client connects when ap set to bridge. However when AP set to ap-bridge same client will not connect. No matter which frequency is selected (even the new 64800)
 
msatter
Forum Veteran
Forum Veteran
Posts: 853
Joined: Tue Feb 18, 2014 12:56 am
Location: Netherlands / Nīderlande

Re: v6.43rc [release candidate] is released!

Wed Jun 13, 2018 12:05 pm

Bug in 6.43rc23:
  1. Upgrade from previous version to 6.43rc23 when you have /ip ipsec peer proposal with hash-algorithm=sha512
  2. Open this proposal in Winbox. You will see that in Winbox it have checked md5 and sha1, but in the export it have sha512
  3. Set hash algorithm to sha512 through Winbox, now autosup file starts generating
Is this bug fixed in 6.43rc27?
Do you have reported this to Mikrotik and if, what is your support ticket id?
RB760iGS (hEX S) with the SFP being cooled.
Running:
RouterOS 6.43RC45 / Winbox 3.16 / MikroTik APP 0.69
Cooling a SFP module: viewtopic.php?f=3&t=132258&p=671105#p671105
 
joserudi
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu Nov 22, 2007 10:16 pm

Re: v6.43rc [release candidate] is released!

Wed Jun 13, 2018 12:19 pm

*) wireless - improved Nv2 reliability on ARM devices;

There are no improvements in this regard, the nv2 protocol in arm devices remains unstable. It continues to have packet losses. At the moment nstreme is the best option.
 
Ulum
just joined
Posts: 2
Joined: Wed Jun 13, 2018 10:32 am

Re: v6.43rc [release candidate] is released!

Wed Jun 13, 2018 2:47 pm

Do you have reported this to Mikrotik and if, what is your support ticket id?
Reported just now. Ticket id is 2018061322004299
 
User avatar
roulyz
just joined
Posts: 10
Joined: Sun Jul 17, 2016 1:00 am
Location: Ivory Coast
Contact:

Re: v6.43rc [release candidate] is released!

Wed Jun 13, 2018 5:09 pm

I have upgrade my SXT LTE (band 3,7), from ROS 6.42.3 to 6.43RC27.
But after upgrading... I can't get access to my SXT LTE.
Wrong username or password message.
Device is on tower so, difficult to reset device.
What is the problem?
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5588
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v6.43rc [release candidate] is released!

Wed Jun 13, 2018 5:26 pm

Please read the changelog.
 
LeftyTs
newbie
Posts: 29
Joined: Thu Nov 03, 2016 2:39 am

Re: v6.43rc [release candidate] is released!

Wed Jun 13, 2018 5:41 pm

I have upgrade my SXT LTE (band 3,7), from ROS 6.42.3 to 6.43RC27.
But after upgrading... I can't get access to my SXT LTE.
Wrong username or password message.
Device is on tower so, difficult to reset device.
What is the problem?
Try to recover with MAC telnet if possible. I had the same issue and I was lucky.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8029
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.43rc [release candidate] is released!

Wed Jun 13, 2018 6:19 pm

He simply needs new WinBox
Russian-speaking forum: http://forum.mikrotik.by. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

¡ɹǝ|SOɹǝʇnoɹ ʞıʇoɹʞıW ɯ‚|

MikroTik. Your life. Your routing.
 
LeftyTs
newbie
Posts: 29
Joined: Thu Nov 03, 2016 2:39 am

Re: v6.43rc [release candidate] is released!

Wed Jun 13, 2018 6:44 pm

I wonder if there will ever be a *nixbox as well. Would anyone know if there is any mac telnet client for *nix systems that works with ROS?
 
blingblouw
Member Candidate
Member Candidate
Posts: 236
Joined: Wed Aug 25, 2010 9:43 am

Re: v6.43rc [release candidate] is released!

Wed Jun 13, 2018 6:59 pm

 
User avatar
eworm
Member Candidate
Member Candidate
Posts: 131
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.43rc [release candidate] is released!

Wed Jun 13, 2018 9:07 pm

But that does not yet work with RouterOS 6.43rc. I opened an issue already.
Is there an detail available about mac telnet protocol?
 
owsugde
just joined
Posts: 15
Joined: Thu Oct 06, 2016 5:01 pm

Re: v6.43rc [release candidate] is released!

Wed Jun 13, 2018 10:56 pm

*) w60g - improved link stability;
*) w60g - improved maximum link distance;
Can anyone already quantify this in some way?

I'd like to know, because two NLoS pathways I tried were ever so slightly too far / too faint as of rc21/23. Maybe after some improvements they could actually work.
 
jarda
Forum Guru
Forum Guru
Posts: 7437
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.43rc [release candidate] is released!

Thu Jun 14, 2018 3:59 am

How could you think that 60g will work without clear line of sight?
 
SergeyMorozov
just joined
Posts: 17
Joined: Sun Apr 22, 2018 9:27 pm

Re: v6.43rc [release candidate] is released!

Thu Jun 14, 2018 9:32 am

How could you think that 60g will work without clear line of sight?
I think no.
 
User avatar
Xymox
Member
Member
Posts: 338
Joined: Thu Jan 21, 2010 5:04 pm
Location: Phoenix, Arizona US
Contact:

Re: v6.43rc [release candidate] is released!

Thu Jun 14, 2018 9:54 am

Looks like LEDs are working from scripting. Thank you :)

No other issues in my SOHO testing with RC27.
 
kugla007
just joined
Posts: 1
Joined: Thu Mar 29, 2018 12:43 pm

Re: v6.43rc [release candidate] is released!

Thu Jun 14, 2018 11:00 am

tested winbox auth. with radius (mschapv2) interworking. works like a charm! :)
Which RADIUS server did you use? Can you post a configuration example?

EDIT: Nevermind, I managed to get it working.
Last edited by kugla007 on Thu Jun 14, 2018 12:08 pm, edited 1 time in total.
 
User avatar
roulyz
just joined
Posts: 10
Joined: Sun Jul 17, 2016 1:00 am
Location: Ivory Coast
Contact:

Re: v6.43rc [release candidate] is released!

Thu Jun 14, 2018 11:50 am

He simply needs new WinBox
I running lastest version Winbox 3.14.
But problem still
 
User avatar
roulyz
just joined
Posts: 10
Joined: Sun Jul 17, 2016 1:00 am
Location: Ivory Coast
Contact:

Re: v6.43rc [release candidate] is released!

Thu Jun 14, 2018 11:51 am

Please read the changelog.
I have read many many time changelog and nothing explicit about solution or notice about this problem
 
mlenhart
Frequent Visitor
Frequent Visitor
Posts: 77
Joined: Mon Oct 30, 2017 11:30 pm

Re: v6.43rc [release candidate] is released!

Thu Jun 14, 2018 10:10 pm


*) w60g - added distance measurement (CLI only);
*) w60g - improved link stability;
*) w60g - improved maximum link distance;
1) distance mesurement in CLI is here since rc19. Has it been improved somehow? Or what is the difference?
3) what is the new maximum link distance for WAP60 and LHG60?

2) I have a 10 meters long test link between 2 LHG60s (YES, I know it too little for LHG60 and can be clearly solved by wireless wire, but unfortunately I do not have possibility for longer distance for testing at the moment and it will be used for 500m "production" link in the near future) and I have to say that link flaps approximately 5 times per day (no rain, no wind, nothing breaking the clear line of sight, no birds flying, no obvious reason for link flap). Can be caused just by the fact it too close to each other? Or is it something what should be checked by MikroTik (maybe a kind of bug)? The link is under continuous iperf3 bi-directional test, where two servers with 1Gbit/s NICs at the end. Result is somewhere between 800-870 Mbit/s for bi-directional TCP connection and PING is somewhere between 5 to 15 ms.
 
OnixJonix
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Thu Jun 22, 2006 11:35 am
Location: Latvia

Re: v6.43rc [release candidate] is released!

Fri Jun 15, 2018 8:56 am

Big problem...
Updated Mys CCR (to 6,43rc27) an now stucked outside! All is running but cant connect - wrong username or password??? A bit of PANIC!!!

------------------
Sorry! Had two winbox on my pc!! Just need new winbox! Sorry!
 
Kindis
Member Candidate
Member Candidate
Posts: 185
Joined: Tue Nov 01, 2011 6:54 pm

Re: v6.43rc [release candidate] is released!

Fri Jun 15, 2018 9:17 am

Big problem...
Updated Mys CCR (to 6,43rc27) an now stucked outside! All is running but cant connect - wrong username or password??? A bit of PANIC!!!

------------------
Sorry! Had two winbox on my pc!! Just need new winbox! Sorry!
You need Winbox 3.14
 
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1325
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.43rc [release candidate] is released!

Fri Jun 15, 2018 1:27 pm

Version 6.43rc29 has been released.

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

MAJOR CHANGES IN v6.43:
----------------------
!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required);
----------------------


Other changes in this release:

*) dhcp - reduced resource usage of DHCP services;
*) ipsec - improved reliability on IPsec hardware encryption for RB1100Dx4;
*) led - added "dark-mode" functionality for SXTsq 5 ac devices;
*) led - use routers uptime as a starting point when turning off LEDs if option was not enabled on boot;
*) sfp - fixed DDM data with SFP+ modules on CRS328-4C-20S-4S+ (introduced in v6.43rc10);
*) sms - do not require "port" and "interface" parameters when sending SMS if already present in configuration;
*) swos - implemented "/system swos" menu that allows to upgrade, reset, save or load configuration and change address for dual-boot CRS devices (CLI only);
*) w60g - improved maximum link distance;
*) w60g - improved RAM memoy allocation processes;
*) wireless - improved Nv2 reliability on ARM devices;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as expected or after crash.

Note that release candidate versions are published strictly for testing purposes and should not be used on production routers.
 
antonsb
MikroTik Support
MikroTik Support
Posts: 130
Joined: Sun Jul 24, 2016 3:12 pm
Location: Riga, Latvia

Re: v6.43rc [release candidate] is released!

Fri Jun 15, 2018 3:06 pm


1) distance mesurement in CLI is here since rc19. Has it been improved somehow? Or what is the difference?
3) what is the new maximum link distance for WAP60 and LHG60?

2) I have a 10 meters long test link between 2 LHG60s (YES, I know it too little for LHG60 and can be clearly solved by wireless wire, but unfortunately I do not have possibility for longer distance for testing at the moment and it will be used for 500m "production" link in the near future) and I have to say that link flaps approximately 5 times per day (no rain, no wind, nothing breaking the clear line of sight, no birds flying, no obvious reason for link flap). Can be caused just by the fact it too close to each other? Or is it something what should be checked by MikroTik (maybe a kind of bug)? The link is under continuous iperf3 bi-directional test, where two servers with 1Gbit/s NICs at the end. Result is somewhere between 800-870 Mbit/s for bi-directional TCP connection and PING is somewhere between 5 to 15 ms.
1) Yes, there are some improvements - mostly stability
3) We are still working on distance improvements - currently no exact distance date available

2) Too much power, try to remove reflector and turn them in different directions.
There are some improvements in rc 29 as well that may fix this
 
User avatar
roulyz
just joined
Posts: 10
Joined: Sun Jul 17, 2016 1:00 am
Location: Ivory Coast
Contact:

Re: v6.43rc [release candidate] is released!

Fri Jun 15, 2018 4:51 pm

Big problem...
Updated Mys CCR (to 6,43rc27) an now stucked outside! All is running but cant connect - wrong username or password??? A bit of PANIC!!!

------------------
Sorry! Had two winbox on my pc!! Just need new winbox! Sorry!
MIKROTIK please how can we solve this problem?
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8029
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.43rc [release candidate] is released!

Fri Jun 15, 2018 4:53 pm

As you can read from your quote, the problem was solved by updating WinBox to the latest version.
Russian-speaking forum: http://forum.mikrotik.by. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

¡ɹǝ|SOɹǝʇnoɹ ʞıʇoɹʞıW ɯ‚|

MikroTik. Your life. Your routing.
 
Haward
just joined
Posts: 10
Joined: Mon Sep 18, 2017 9:56 pm
Location: Czech Republic

Re: v6.43rc [release candidate] is released!

Sun Jun 17, 2018 7:24 pm

Can somebody please recommend stable SW for wireless wire wAP60G ? I have tried many but all are unstable ? (jam after couple of days = hard reset is necessary). It is probably linked with hot weather ... Thank you.
 
antonsb
MikroTik Support
MikroTik Support
Posts: 130
Joined: Sun Jul 24, 2016 3:12 pm
Location: Riga, Latvia

Re: v6.43rc [release candidate] is released!

Mon Jun 18, 2018 9:59 am

Can somebody please recommend stable SW for wireless wire wAP60G ? I have tried many but all are unstable ? (jam after couple of days = hard reset is necessary). It is probably linked with hot weather ... Thank you.
Please provide more details to support@mikrotik.com
 
antonsb
MikroTik Support
MikroTik Support
Posts: 130
Joined: Sun Jul 24, 2016 3:12 pm
Location: Riga, Latvia

Re: v6.43rc [release candidate] is released!

Mon Jun 18, 2018 10:03 am

I am still experiencing a problem with the WAP60 on this firmware.

Both client & AP running latest release.

Client connects when ap set to bridge. However when AP set to ap-bridge same client will not connect. No matter which frequency is selected (even the new 64800)
Do You have level4 license on Bridge device?
 
blingblouw
Member Candidate
Member Candidate
Posts: 236
Joined: Wed Aug 25, 2010 9:43 am

Re: v6.43rc [release candidate] is released!

Mon Jun 18, 2018 10:18 am

Yes I do
 
Jaxworld
just joined
Posts: 4
Joined: Mon Jun 18, 2018 10:22 am

Re: v6.43rc [release candidate] is released!

Mon Jun 18, 2018 10:43 am

We updated our CCR1016-12G and our network seems to be inverted! We can't tell if it's running default configurations somehow, but our whole network is running in a degraded state.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8029
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.43rc [release candidate] is released!

Mon Jun 18, 2018 10:49 am

Congratulations. Now you know that RC versions must not be installed in production environments.

Rollback to the 'current' or 'bugfix' version and be happy.
Russian-speaking forum: http://forum.mikrotik.by. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

¡ɹǝ|SOɹǝʇnoɹ ʞıʇoɹʞıW ɯ‚|

MikroTik. Your life. Your routing.
 
Jaxworld
just joined
Posts: 4
Joined: Mon Jun 18, 2018 10:22 am

Re: v6.43rc [release candidate] is released!

Mon Jun 18, 2018 10:55 am

Sorry, I misread the title. We're actually running 6.42.3 with this issue after discovering a vulnerability in 6.35.2. My apologies.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8029
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.43rc [release candidate] is released!

Mon Jun 18, 2018 11:49 am

Then post details of your problem in appropriate topic.
Russian-speaking forum: http://forum.mikrotik.by. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

¡ɹǝ|SOɹǝʇnoɹ ʞıʇoɹʞıW ɯ‚|

MikroTik. Your life. Your routing.
 
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1325
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.43rc [release candidate] is released!

Tue Jun 19, 2018 12:45 pm

Version 6.43rc32 has been released.

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

MAJOR CHANGES IN v6.43:
----------------------
!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility;
----------------------


Other changes in this release:

!) winbox - minimal required version is v3.15;
*) api - properly classify API sessions in log;
*) bridge - improved performance when bridge VLAN filtering is used without hardware offloading;
*) chr - enabled promiscious mode (requires to be enabled on host as well) when running CHR on Hyper-V;
*) crs317 - fixed Ethernet inteface stuck on 100 Mbps speed;
*) crs328 - fixed transmit on sfp-sfpplus1 and sfp-sfpplus2 interfaces;
*) crs3xx - do not report SFP interface as running when interface on opposite side is disabled;
*) dude - fixed client auto upgrade (broken since 6.43rc17);
*) export - do not show w60g password on "hide-sensitive" type of export;
*) log - fixed false log warnings about system status after power on for CRS328-4C-20S-4S+;
*) lte - show UICC in correct format for SXT LTE devices;
*) romon - properly classify RoMON sessions in log and active users list;
*) w60g - improved maximal achievable distance;
*) w60g - properly report center status under "tx-sector-info";

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as expected or after crash.

Note that release candidate versions are published strictly for testing purposes and should not be used on production routers.
 
mlenhart
Frequent Visitor
Frequent Visitor
Posts: 77
Joined: Mon Oct 30, 2017 11:30 pm

Re: v6.43rc [release candidate] is released!

Tue Jun 19, 2018 1:32 pm

*) w60g - improved maximal achievable distance;
what is the new maximum distance for wAP60g and LHG60G?
 
owsugde
just joined
Posts: 15
Joined: Thu Oct 06, 2016 5:01 pm

Re: v6.43rc [release candidate] is released!

Tue Jun 19, 2018 1:40 pm

How could you think that 60g will work without clear line of sight?
That's just wireless PHY basics. The smaller the wavelength gets, the penetrative wave properties decrease rapidly but the reflective ones increase. Think low/medium frequency ≈ broadcast radio (goes literally straight through the ground), very high frequency ≈ visible light (is reflected almost 100% on mirrors or white objects). This is basically the point for having beamforming, too.

You can try it out yourselves. In the office or at home, put two W60s somewhere in the back of different rooms (with the doors open) and even point them in opposite directions. A connection will be established nonetheless in many cases. In the CLI, you will be able to see a connection length considerably longer than the "beeline" distance between the two devices. What you are witnessing is NLoS propagation.

All that said, I have tried out the benefits from rc27 myself. It got me up to 2dB better RSSI for NLoS setups. Not quite enough to get the "big" route going, but it's something. Eager to try out the new rc32. It would just be so neat if I could go NLoS, without having to put a small relay with two additional W60s in the middle.
 
User avatar
genesispro
Member Candidate
Member Candidate
Posts: 114
Joined: Fri Mar 14, 2014 12:33 pm

Re: v6.43rc [release candidate] is released!

Tue Jun 19, 2018 2:19 pm

I upgraded to 6.43rc32 and even using winbox 3.15 login fails!
 
zyzelis
Member Candidate
Member Candidate
Posts: 206
Joined: Sun Apr 08, 2012 9:25 pm

Re: v6.43rc [release candidate] is released!

Tue Jun 19, 2018 2:24 pm

I upgraded to 6.43rc32 and even using winbox 3.15 login fails!
look for problem on your network, for me works fine.
Last edited by zyzelis on Tue Jun 19, 2018 3:27 pm, edited 1 time in total.
 
User avatar
genesispro
Member Candidate
Member Candidate
Posts: 114
Joined: Fri Mar 14, 2014 12:33 pm

Re: v6.43rc [release candidate] is released!

Tue Jun 19, 2018 2:33 pm

I am directly attached to it and still it doesn't work
I upgraded to 6.43rc32 and even using winbox 3.15 login fails!
look problem on your network, for me works fine.
 
User avatar
genesispro
Member Candidate
Member Candidate
Posts: 114
Joined: Fri Mar 14, 2014 12:33 pm

Re: v6.43rc [release candidate] is released!

Tue Jun 19, 2018 3:13 pm

I reset it and now it works...
weird because the password is saved as a favorite in winbox so I wasn't typing anything wrong earlier... and right before the update I used the same favorite to login to it and update it!
 
zyzelis
Member Candidate
Member Candidate
Posts: 206
Joined: Sun Apr 08, 2012 9:25 pm

Re: v6.43rc [release candidate] is released!

Tue Jun 19, 2018 3:29 pm

I reset it and now it works...
weird because the password is saved as a favorite in winbox so I wasn't typing anything wrong earlier... and right before the update I used the same favorite to login to it and update it!
i have observed this weird issue with password in earlier rc. i just changed password before upgrade and not logged in after upgrade with new one, just with old. :)
Last edited by zyzelis on Tue Jun 19, 2018 3:33 pm, edited 1 time in total.

Who is online

Users browsing this forum: kramer, Traveller and 8 guests