I recently installed one SXT LTE modem at home.
At the beginning the wole 5 leds were off ..later one i discovered that those leds must be activated on the webconfig.
So after that, all the leds are on but even with different threshold from led1 to led 5 ...all leds are on...
THe signal strenght is aroudn 89-90 db..but event the led 5 threshold is set to -51db is always on..
Anybody can explain me why? I would lik to use those leds to better fine tune the antenna position..but like this is basically impossible.
THanks for your help.