Community discussions

 
User avatar
Alessio Garavano
Member Candidate
Member Candidate
Posts: 299
Joined: Sat May 29, 2004 12:49 am
Location: Corrientes, Argentina
Contact:

Re: ARM devices and NV2 protocol

Tue Nov 27, 2018 4:57 pm

You are testing in PTP or PTMP? LHG 5ac (ARM) and Dynadish 5ac (MIPSBE) or which devices?
Alessio Garavano
http://www.isparg.com.ar
 
mistry7
Forum Veteran
Forum Veteran
Posts: 966
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: ARM devices and NV2 protocol

Tue Nov 27, 2018 5:29 pm

There is no ARM NV2 fix.
 
2jarek
Frequent Visitor
Frequent Visitor
Posts: 91
Joined: Thu May 17, 2007 3:28 pm
Location: Poland

Re: ARM devices and NV2 protocol

Tue Nov 27, 2018 5:30 pm

You are testing in PTP or PTMP? LHG 5ac (ARM) and Dynadish 5ac (MIPSBE) or which devices?
1)ALL ARM (LHG/DISC tested don't want waste more time for SQ)
2)ALL NV2 scenarios ALL.... no matter ptmp, bridge, routing just NV2+ ARM still CRAP.
 
antonmance
just joined
Posts: 8
Joined: Sun May 06, 2018 6:45 pm

Re: ARM devices and NV2 protocol

Tue Nov 27, 2018 6:48 pm

Ptp works fine
 
mfr476
just joined
Posts: 23
Joined: Thu Oct 11, 2018 4:51 pm

Re: ARM devices and NV2 protocol

Tue Nov 27, 2018 9:03 pm

In 802.11 and nstreme work fine or loss a lot of packet?
 
mistry7
Forum Veteran
Forum Veteran
Posts: 966
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: ARM devices and NV2 protocol

Tue Nov 27, 2018 9:25 pm

In 802.11 and nstreme work fine or loss a lot of packet?
I´m not able to test, we removed all mounted ARM Hardware...
 
2jarek
Frequent Visitor
Frequent Visitor
Posts: 91
Joined: Thu May 17, 2007 3:28 pm
Location: Poland

Re: ARM devices and NV2 protocol

Tue Nov 27, 2018 10:46 pm

Ptp works fine
Try nv2 ptp & stop lie
 
User avatar
Alessio Garavano
Member Candidate
Member Candidate
Posts: 299
Joined: Sat May 29, 2004 12:49 am
Location: Corrientes, Argentina
Contact:

Re: ARM devices and NV2 protocol

Wed Nov 28, 2018 1:14 am

Ptp works fine
Can you share screenshots with the PTP? Thx!
Alessio Garavano
http://www.isparg.com.ar
 
antonmance
just joined
Posts: 8
Joined: Sun May 06, 2018 6:45 pm

Re: ARM devices and NV2 protocol

Wed Nov 28, 2018 3:45 pm

Ptp is working

Image
You do not have the required permissions to view the files attached to this post.
 
2jarek
Frequent Visitor
Frequent Visitor
Posts: 91
Joined: Thu May 17, 2007 3:28 pm
Location: Poland

Re: ARM devices and NV2 protocol

Wed Nov 28, 2018 4:09 pm

Ptp is working

Image
Working like CRAP. TCP/IP bandwitch test for NV2 forks worse than old 411 RB 300 mhz u read this topic ? Make test not "connection"
 
User avatar
Alessio Garavano
Member Candidate
Member Candidate
Posts: 299
Joined: Sat May 29, 2004 12:49 am
Location: Corrientes, Argentina
Contact:

Re: ARM devices and NV2 protocol

Wed Nov 28, 2018 4:32 pm

Yes, in NV2 we have good signal and CCQ too, but the performance is a shit... in nstreme or 802.11 is better...
Alessio Garavano
http://www.isparg.com.ar
 
antonmance
just joined
Posts: 8
Joined: Sun May 06, 2018 6:45 pm

Re: ARM devices and NV2 protocol

Wed Nov 28, 2018 5:45 pm

Yes, in NV2 we have good signal and CCQ too, but the performance is a shit... in nstreme or 802.11 is better...
You are right, 802.11 is better, but now it can conect in nv2 and work
.
nv22.png
You do not have the required permissions to view the files attached to this post.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2174
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: ARM devices and NV2 protocol

Wed Nov 28, 2018 9:35 pm

deleted
Last edited by honzam on Wed Nov 28, 2018 9:37 pm, edited 1 time in total.
LAN, FTTx, Wireless. ISP operator
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2174
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: ARM devices and NV2 protocol

Wed Nov 28, 2018 9:36 pm

You are right, 802.11 is better, but now it can conect in nv2 and work
Are you kidding? It is the end of 2018. We have AC hardware and you consider the 53 Mbit result to be good? With 40Mhz on P2P? :-) :-)
Very bad, very bad...
LAN, FTTx, Wireless. ISP operator
 
djvolt1942
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu Jan 18, 2018 7:13 pm

Re: ARM devices and NV2 protocol

Wed Nov 28, 2018 10:41 pm

You are right, 802.11 is better, but now it can conect in nv2 and work
Are you kidding? It is the end of 2018. We have AC hardware and you consider the 53 Mbit result to be good? With 40Mhz on P2P? :-) :-)
Very bad, very bad...
Also 5100 :lol: :lol: :lol: :lol: :lol:

LT400AC: 2,85KM -65/-66 20Mhz, 5500, 131.04Mbps/131.04Mbps :P
*LT400AC mean feeder from LB23AC with modified DIsh 400mm
_________________
###############
PtP 60GHz Pro MHD: $660 exc VAT
http://24.multimediahd.pl/en/60ghz/8-wi ... link-.html
www.siec.multimediahd.pl/60ghz
###############
Madex Cables
 
mistry7
Forum Veteran
Forum Veteran
Posts: 966
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: ARM devices and NV2 protocol

Wed Nov 28, 2018 11:08 pm

You are right, 802.11 is better, but now it can conect in nv2 and work
Are you kidding? It is the end of 2018. We have AC hardware and you consider the 53 Mbit result to be good? With 40Mhz on P2P? :-) :-)
Very bad, very bad...
Also 5100 :lol: :lol: :lol: :lol: :lol:

LT400AC: 2,85KM -65/-66 20Mhz, 5500, 131.04Mbps/131.04Mbps :P
*LT400AC mean feeder from LB23AC with modified DIsh 400mm
That’s why i‘m writing Mikrotik Wirless is outdated / legacy
With this throughout there is no future!
 
antonmance
just joined
Posts: 8
Joined: Sun May 06, 2018 6:45 pm

Re: ARM devices and NV2 protocol

Thu Nov 29, 2018 12:22 am

Also 5100 :lol: :lol: :lol: :lol: :lol:
Surprise me, show your best link, mine is lhg, 5km, real throughout 140M.
 
djvolt1942
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu Jan 18, 2018 7:13 pm

Re: ARM devices and NV2 protocol

Thu Nov 29, 2018 1:34 am

WoW really? :D At distance 7,2KM i will do 240Mbps real thoughput on 40MHz on pbe ac 500 :P

LT400AC on distance 5KM can send 400Mbps real thoughput at 80MHz, 200Mbps at 40MHz and 100Mbps at 20MHz, it will be also option 50Mhz so it will be around 300Mbps :P

Can AC from MT do this? I think NO, NO, NO :D I have 2 x LHG AC and on NV2 i will reach only 25Mbps :D Shit!
_________________
###############
PtP 60GHz Pro MHD: $660 exc VAT
http://24.multimediahd.pl/en/60ghz/8-wi ... link-.html
www.siec.multimediahd.pl/60ghz
###############
Madex Cables
 
antonmance
just joined
Posts: 8
Joined: Sun May 06, 2018 6:45 pm

Re: ARM devices and NV2 protocol

Thu Nov 29, 2018 3:21 pm

WoW really? :D At distance 7,2KM i will do 240Mbps real thoughput on 40MHz on pbe ac 500 :P

LT400AC on distance 5KM can send 400Mbps real thoughput at 80MHz, 200Mbps at 40MHz and 100Mbps at 20MHz, it will be also option 50Mhz so it will be around 300Mbps :P

Can AC from MT do this? I think NO, NO, NO :D I have 2 x LHG AC and on NV2 i will reach only 25Mbps :D Shit!
Dont believe, show 400M LT400AC, if so ill buy one.
 
mistry7
Forum Veteran
Forum Veteran
Posts: 966
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: ARM devices and NV2 protocol

Thu Nov 29, 2018 3:35 pm

WoW really? :D At distance 7,2KM i will do 240Mbps real thoughput on 40MHz on pbe ac 500 :P

LT400AC on distance 5KM can send 400Mbps real thoughput at 80MHz, 200Mbps at 40MHz and 100Mbps at 20MHz, it will be also option 50Mhz so it will be around 300Mbps :P

Can AC from MT do this? I think NO, NO, NO :D I have 2 x LHG AC and on NV2 i will reach only 25Mbps :D Shit!
Dont believe, show 400M LT400AC, if so ill buy one.
Same on Mimosa C5C 20 MHZ =130 MBit , 40 MHz about 280-300 MBit real TCP ( 5Km with RF Elements TP550)
 
djvolt1942
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu Jan 18, 2018 7:13 pm

Re: ARM devices and NV2 protocol

Thu Nov 29, 2018 4:46 pm

IMG_20181129_154120.jpg
IMG_20181129_154052.jpg
You do not have the required permissions to view the files attached to this post.
_________________
###############
PtP 60GHz Pro MHD: $660 exc VAT
http://24.multimediahd.pl/en/60ghz/8-wi ... link-.html
www.siec.multimediahd.pl/60ghz
###############
Madex Cables
 
antonmance
just joined
Posts: 8
Joined: Sun May 06, 2018 6:45 pm

Re: ARM devices and NV2 protocol

Thu Nov 29, 2018 5:18 pm

IMG_20181129_154120.jpg
IMG_20181129_154052.jpg
Distance?
 
djvolt1942
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu Jan 18, 2018 7:13 pm

Re: ARM devices and NV2 protocol

Thu Nov 29, 2018 5:31 pm

2,75KM, frequency 5500, signal -61, tx-power only -4dbm!!! The same result will be on other like 6KM but now I cannot do the test, because peoples downloading :P But now you see that on 20MHz can do 130Mbps, you cannot do the same on LHG AC :D and never will be :P Maybe you have only 50-60Mbpa at 20MHz :P
_________________
###############
PtP 60GHz Pro MHD: $660 exc VAT
http://24.multimediahd.pl/en/60ghz/8-wi ... link-.html
www.siec.multimediahd.pl/60ghz
###############
Madex Cables
 
antonmance
just joined
Posts: 8
Joined: Sun May 06, 2018 6:45 pm

Re: ARM devices and NV2 protocol

Thu Nov 29, 2018 5:50 pm

2,75KM, frequency 5500, signal -61, tx-power only -4dbm!!! The same result will be on other like 6KM but now I cannot do the test, because peoples downloading :P But now you see that on 20MHz can do 130Mbps, you cannot do the same on LHG AC :D and never will be :P Maybe you have only 50-60Mbpa at 20MHz :P
-4dbm to 2.7km ??? I dont believe. May be your spectre is very very very clean. May be ap and cpe are in the same room.
 
djvolt1942
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu Jan 18, 2018 7:13 pm

Re: ARM devices and NV2 protocol

Thu Nov 29, 2018 6:03 pm

lt400ac.jpg
You do not have the required permissions to view the files attached to this post.
_________________
###############
PtP 60GHz Pro MHD: $660 exc VAT
http://24.multimediahd.pl/en/60ghz/8-wi ... link-.html
www.siec.multimediahd.pl/60ghz
###############
Madex Cables
 
antonmance
just joined
Posts: 8
Joined: Sun May 06, 2018 6:45 pm

Re: ARM devices and NV2 protocol

Thu Nov 29, 2018 6:14 pm

lt400ac.jpg
Througoutput 0, wow
 
djvolt1942
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu Jan 18, 2018 7:13 pm

Re: ARM devices and NV2 protocol

Thu Nov 29, 2018 6:37 pm

Eh... You dont understand, you dont see max capacity? Capacity = max thoughput in AC mode in UBNT so there is 134Mbps in 20MHz!!!

Send me max thoughput and max capacity from LHG AC in 20MHz... I have two LHG AC, MT is shi*. in this point, this is my opinion.

From the other side I have ALU dishes 400mm for your LHG AC :P with ABS UV Covers, please check my following link :P
_________________
###############
PtP 60GHz Pro MHD: $660 exc VAT
http://24.multimediahd.pl/en/60ghz/8-wi ... link-.html
www.siec.multimediahd.pl/60ghz
###############
Madex Cables
 
mistry7
Forum Veteran
Forum Veteran
Posts: 966
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: ARM devices and NV2 protocol

Thu Nov 29, 2018 9:40 pm

Think about the last 10 ROS releases, there is much development for W60G, but nothing on 802.11ac, Mikrotik has no Interest in normal Wireless, we have no Wave 2, there are no signs for 802.11ax!

Mikrotik Wireless is more then outdated and the most Problems are ROS based, or say based on the own Wireless Drivers they use,

My M11G with Lede/ Openwrt and Ath10k performances much better then with Ros!
 
2jarek
Frequent Visitor
Frequent Visitor
Posts: 91
Joined: Thu May 17, 2007 3:28 pm
Location: Poland

Re: ARM devices and NV2 protocol

Fri Nov 30, 2018 12:37 am

YEP 1K Euro 6 months ago wasted for DISC/LHG/SQ ARM. Mikrotik sell me broken products & use my money for develop "kids controll" &many idiotic features. I Don't buy any ARM from 6 month, only classic LHG/SQ. NOW almost ALL links p2p changed for UBNT airfiber5 &works like charm. Only p2mp still mikrotik because can't easy migrate.

NOW 6.44 Beta 40 / 6.43.4 ARM family all AC products:
1)NV2 broken because half speed (all mikrotik NV2 platforms are slow but NV2+ARM slow like RB133C CRAP)
2)802.11 sometimes random latency spikes on all ARM AC brides/apclients/NAT/router no matter

This ARM hardware have powerful possibilities but mikrotik don't want or cant develop ?
Maybe mikrotik gave us exchange program one used LHG AC for classic old LHG ?
 
mistry7
Forum Veteran
Forum Veteran
Posts: 966
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: ARM devices and NV2 protocol

Fri Nov 30, 2018 10:10 am

Whats about collecting all arm devices and put it on the desk in March ( MuM Europe) and ask Face to Face, what they can offer as solution?

gets a thick pile of electrical waste
 
server8
Member
Member
Posts: 312
Joined: Fri Apr 22, 2011 1:27 pm

Re: ARM devices and NV2 protocol

Fri Nov 30, 2018 3:38 pm

Vienna is not far away from italy :-)
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2174
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: ARM devices and NV2 protocol

Fri Nov 30, 2018 3:53 pm

My M11G with Lede/ Openwrt and Ath10k performances much better then with Ros!
Can you share any results? The same configuration with LEDE and with ROS?
LAN, FTTx, Wireless. ISP operator
 
mistry7
Forum Veteran
Forum Veteran
Posts: 966
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: ARM devices and NV2 protocol

Fri Nov 30, 2018 6:47 pm

My M11G with Lede/ Openwrt and Ath10k performances much better then with Ros!
Can you share any results? The same configuration with LEDE and with ROS?
They are installed with Wave 2 PCIE Modules from Compex
Next time I prepare new ones I will try Mikrotik AC modules too
 
User avatar
ahteran
just joined
Posts: 24
Joined: Sun Nov 09, 2014 5:07 pm

Re: ARM devices and NV2 protocol

Fri Nov 30, 2018 7:38 pm

My M11G with Lede/ Openwrt and Ath10k performances much better then with Ros!
Can you share any results? The same configuration with LEDE and with ROS?
They are installed with Wave 2 PCIE Modules from Compex
Next time I prepare new ones I will try Mikrotik AC modules too
Compex wave2 work in routeros?
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2174
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: ARM devices and NV2 protocol

Fri Nov 30, 2018 8:10 pm

Compex wave2 work in routeros?
In ROS no, but in LEDE yes
LAN, FTTx, Wireless. ISP operator
 
mfr476
just joined
Posts: 23
Joined: Thu Oct 11, 2018 4:51 pm

Re: ARM devices and NV2 protocol

Sat Dec 01, 2018 9:13 am

Compex wave2 work in routeros?
In ROS no, but in LEDE yes


Share please :D
 
server8
Member
Member
Posts: 312
Joined: Fri Apr 22, 2011 1:27 pm

Re: ARM devices and NV2 protocol

Mon Dec 03, 2018 5:51 pm

menmnto :-(
 
mfr476
just joined
Posts: 23
Joined: Thu Oct 11, 2018 4:51 pm

Re: ARM devices and NV2 protocol

Wed Dec 05, 2018 11:26 pm

New news?
 
djvolt1942
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu Jan 18, 2018 7:13 pm

Re: ARM devices and NV2 protocol

Wed Dec 05, 2018 11:33 pm

yes, no problems with NV2 :D
_________________
###############
PtP 60GHz Pro MHD: $660 exc VAT
http://24.multimediahd.pl/en/60ghz/8-wi ... link-.html
www.siec.multimediahd.pl/60ghz
###############
Madex Cables
 
2jarek
Frequent Visitor
Frequent Visitor
Posts: 91
Joined: Thu May 17, 2007 3:28 pm
Location: Poland

Re: ARM devices and NV2 protocol

Thu Dec 06, 2018 12:21 am

Big PCQ QUEUE help a little from AP side(Interface QUEUE only no tree 0 firewall fast forward bridge). 500KB limit Image
You do not have the required permissions to view the files attached to this post.
 
UpRunTech
Frequent Visitor
Frequent Visitor
Posts: 58
Joined: Fri Jul 27, 2012 12:11 pm

Re: ARM devices and NV2 protocol

Sat Dec 08, 2018 10:40 pm

Apparently there is a diagnosis and there are patches in the pipeline.
 
mistry7
Forum Veteran
Forum Veteran
Posts: 966
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: ARM devices and NV2 protocol

Sun Dec 09, 2018 9:06 pm

Apparently there is a diagnosis and there are patches in the pipeline.
After 8 or 9 unsuccessful patches and 12 month this issue is unfixed I don’t believe that
 
mfr476
just joined
Posts: 23
Joined: Thu Oct 11, 2018 4:51 pm

Re: ARM devices and NV2 protocol

Sun Dec 09, 2018 10:27 pm

We have a Big problem, please @mikrotik solve. If need something of user mikrotik only need sais us. We are wisp and nedd solutions. @mikrotik is not other bad brand...
 
mistry7
Forum Veteran
Forum Veteran
Posts: 966
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: ARM devices and NV2 protocol

Wed Dec 12, 2018 8:38 am

@normis
We are close to a solution to the Nv2+ARM performance issue, please hold on for a day or two, when we will release the changes in RC release chain, for first testing.
Close enough or is this cold case closed, like Spectral Scan?
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2174
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: ARM devices and NV2 protocol

Wed Dec 12, 2018 8:57 pm

We have a Big problem, please @mikrotik solve. If need something of user mikrotik only need sais us. We are wisp and nedd solutions. @mikrotik is not other bad brand...
We are also WISP and we are dealing with the same problem. I think it's about a large number of WISPs and @Mikrotik does not solve it anyway... :(
LAN, FTTx, Wireless. ISP operator
 
mistry7
Forum Veteran
Forum Veteran
Posts: 966
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: ARM devices and NV2 protocol

Wed Dec 12, 2018 10:12 pm

We have a Big problem, please @mikrotik solve. If need something of user mikrotik only need sais us. We are wisp and nedd solutions. @mikrotik is not other bad brand...
We are also WISP and we are dealing with the same problem. I think it's about a large number of WISPs and @Mikrotik does not solve it anyway... :(

Why solve it, when people’s buy this crap unfixed?
My distri asked last week why my Mikrotik amount is near to nothing in Q3 and Q4, and he sees that not only at us.....
 
mfr476
just joined
Posts: 23
Joined: Thu Oct 11, 2018 4:51 pm

Re: ARM devices and NV2 protocol

Wed Dec 12, 2018 10:40 pm

I had the hardware yet....

Who is online

Users browsing this forum: HonorQ and 19 guests