Community discussions

MUM Europe 2020
 
MonkeyDan
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 52
Joined: Fri Dec 29, 2017 8:41 pm

SXTsq Lite60

Mon Sep 10, 2018 11:16 am

Saw this announcement and got excited: A (cheaper) radio that fills the awkward gap between 100m and 200m on a multipoint Wirless Wire AP where a dish feels like overkill.
But... it only has a 100 Mbps port. :shock:
I know it’s cheaper, but not having a gig port is a major bummer :(
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24334
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: SXTsq Lite60

Mon Sep 10, 2018 11:20 am

it is a client device for multipoint setups, so if your wAP60G has Gigabit port and capabilities, you will split it into 8 clients. Then each client doesn't need 1Gbit port.
No answer to your question? How to write posts
 
MonkeyDan
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 52
Joined: Fri Dec 29, 2017 8:41 pm

Re: SXTsq Lite60

Mon Sep 10, 2018 11:30 am

At 100% utilization, sure, but that’s usually not the case. Even with overhead, a single station on a quiet 8-station wAP 60G should (hopefully?) see 1 Gbps half duplex.
Still, with the latest firmware, the original Wireless Wire goes pretty far. Anything further than 150m we’ll keep using the dish.
Last edited by MonkeyDan on Mon Sep 10, 2018 11:31 am, edited 1 time in total.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24334
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: SXTsq Lite60

Mon Sep 10, 2018 11:31 am

I suggest looking at this product from the mentioned point of view. For higher requirements, we still have the other models.
No answer to your question? How to write posts
 
marcin21
Member Candidate
Member Candidate
Posts: 188
Joined: Tue May 04, 2010 4:50 pm

Re: SXTsq Lite60

Mon Sep 10, 2018 2:08 pm

how about ptp scenario with SXTsq lite 60 ? is fast ethernet sufficient?
how about less than 8 CPE , for example 3-4 cpe is FE solution to waste capacity of 2ghz wide channel ?
another great idea from mikrotik, no doubt.
RB711G/911G with GE that is merely capable to transfer over 100mbps, but SXTsq that should link 2160mbps and transfer over 1gbps receive Fast Ethernet, brilliant!
 
server8
Member
Member
Posts: 412
Joined: Fri Apr 22, 2011 1:27 pm

Re: SXTsq Lite60

Mon Sep 10, 2018 3:12 pm

@Normis the limit of 8 clients per AP 'll updated to 16 ore more clients in next future?
 
385esantic
just joined
Posts: 10
Joined: Fri Jan 11, 2013 10:10 am
Location: Croatia

Re: SXTsq Lite60

Fri Dec 28, 2018 6:53 am

Can I make point to point link with 2pcs sxtsq lite60? I need it for 300 meters distance
 
mistry7
Forum Guru
Forum Guru
Posts: 1359
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: SXTsq Lite60

Fri Dec 28, 2018 9:08 am

Can I make point to point link with 2pcs sxtsq lite60? I need it for 300 meters distance
Possible but I will drop on every rain
 
ronniee
Member Candidate
Member Candidate
Posts: 123
Joined: Sun Jan 15, 2006 9:32 pm

Re: SXTsq Lite60

Thu Feb 21, 2019 10:56 am

if I have under 200m distance
can I make a bridge between these SXTsq-60ad's?
if the 5GHz is full, it can be safe and stabile?
 
server8
Member
Member
Posts: 412
Joined: Fri Apr 22, 2011 1:27 pm

Re: SXTsq Lite60

Thu Feb 21, 2019 5:55 pm

200m is the limit but it 'd work

Who is online

Users browsing this forum: No registered users and 22 guests