Community discussions

 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1192
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: v6.44beta [testing] is released!

Fri Oct 12, 2018 6:08 pm

Yes, you are right. It has nothing to do with ROS. As Sob said, it's probably a preparation for later actions. Sorry for the bump in.
But an actual PE release for Winbox could be a nice step :-)
Torturing CCR1009-7G-1C-1S+, RB450G, RB750GL, RB951G-2HnD, RB960PGS, RB260GSP, OmniTIK 5HnD and NetMetal 922UAGS-5HPacD + R11e-5HnD in my home network.
 
pakud
just joined
Posts: 3
Joined: Sat Oct 13, 2018 9:59 pm

Re: v6.44beta [testing] is released!

Sat Oct 13, 2018 10:07 pm

the recent betas [ eg 6.44beta20 ] allow for upgrade of the lte card's firmware in RBwAPR-2nD&R11e-LTE, yet it's not possible in the RBwAPR-2nD&R11e-LTE-US

do you plan for allowing lte firmware upgrade on the US version?

thanks!
 
raffav
Member Candidate
Member Candidate
Posts: 243
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.44beta [testing] is released!

Sat Oct 13, 2018 11:22 pm

Test on the current/stable channel
I was also trying to do that without success.
I think I'm running into a config bug in 6.44 Beta 20

I've upgraded my testing router and saw the L2TP/IPSec unsafe config notice. So I was playing around with configs to fix that.

Once the L2TP peer is initially added, any attempt to edit the peer config errors out with "Couldn't change IPSec Peer <::/0> - certificate chain is supported only in IKEv2 (6)"
This seems to affect both manually and dynamically added peers.

Any truly valid peer config commits successfully when initially configured, but any attempt to change them results in the same error.

Also, since Mikrotik is warning against L2TP/IPSec PSK, is there any plans to expand the L2TP setup in PPP to be more secure?
Sent from my XT1580 using Tapatalk

 
notToNew
Member Candidate
Member Candidate
Posts: 131
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.44beta [testing] is released!

Sun Oct 14, 2018 4:03 am

the recent betas [ eg 6.44beta20 ] allow for upgrade of the lte card's firmware in RBwAPR-2nD&R11e-LTE,
Is 008 still the current firmware?
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
pakud
just joined
Posts: 3
Joined: Sat Oct 13, 2018 9:59 pm

Re: v6.44beta [testing] is released!

Sun Oct 14, 2018 9:05 am

the recent betas [ eg 6.44beta20 ] allow for upgrade of the lte card's firmware in RBwAPR-2nD&R11e-LTE,
Is 008 still the current firmware?
after an upgrade on RBwAPR-2nD&R11e-LTE /interface lte info lte1 shows "MikroTik_CP_2.160.000_v008", while RBwAPR-2nD&R11e-LTE-US - MPSS: R11eL_v12.09.171931 APSS: R11eL_v02.14.173531 CUSTAPP

running /interface lte firmware-upgrade upgrade=y lte1 on the US device gives: failure: Device does not support this feature!
 
mkx
Forum Veteran
Forum Veteran
Posts: 765
Joined: Thu Mar 03, 2016 10:23 pm

Re: v6.44beta [testing] is released!

Sun Oct 14, 2018 10:42 am

Change log for this beta clearly states that R11e firmware upgrade is available only for international version of devices .... can't you read?
BR,
Metod
 
pakud
just joined
Posts: 3
Joined: Sat Oct 13, 2018 9:59 pm

Re: v6.44beta [testing] is released!

Sun Oct 14, 2018 7:06 pm

Change log for this beta clearly states that R11e firmware upgrade is available only for international version of devices .... can't you read?
actually i can - that's why i stated my question: do you plan for allowing lte firmware upgrade on the US version?
 
mkx
Forum Veteran
Forum Veteran
Posts: 765
Joined: Thu Mar 03, 2016 10:23 pm

Re: v6.44beta [testing] is released!

Sun Oct 14, 2018 10:16 pm

Change log for this beta clearly states that R11e firmware upgrade is available only for international version of devices .... can't you read?
actually i can - that's why i stated my question: do you plan for allowing lte firmware upgrade on the US version?
Sorry, didn't see the question in your previous post.
BR,
Metod
 
schrotn
just joined
Posts: 11
Joined: Sat Sep 13, 2014 8:23 am

Re: v6.44beta [testing] is released!

Mon Oct 15, 2018 6:52 am

I previously had 6.44 b(~6 or 8, can't recall) and it didn't warn about either l2tp/ipsec psk nor ipsec certificates.
I'm fairly certain it's a recent addition to the testing channel only.
Test on the current/stable channel
I was also trying to do that without success.

Sent from my XT1580 using Tapatalk
 
fredcom
just joined
Posts: 9
Joined: Thu Jan 18, 2018 7:55 pm

Re: v6.44beta [testing] is released!

Mon Oct 15, 2018 10:53 am

Hey guys,

I have a sort of offtopic question, but since we have the ability to upgrade the firmware now - where does one get the new firmware for R11e-LTE?
 
User avatar
juliokato
Member Candidate
Member Candidate
Posts: 220
Joined: Mon Oct 26, 2015 4:27 pm
Location: Brazil

Re: v6.44beta [testing] is released!

Mon Oct 15, 2018 2:46 pm

I apologize my grammatical errors, my english not so good, I am not a native speaker.
Wiki is maintained in English. I use Google translator. 8)
 
raffav
Member Candidate
Member Candidate
Posts: 243
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.44beta [testing] is released!

Mon Oct 15, 2018 3:44 pm

I previously had 6.44 b(~6 or 8, can't recall) and it didn't warn about either l2tp/ipsec psk nor ipsec certificates.
I'm fairly certain it's a recent addition to the testing channel only.
Test on the current/stable channel
I was also trying to do that without success.

Sent from my XT1580 using Tapatalk
On the 43rc was also get the sames errors
I sent a email to support they told me that I had to use the cli for that. maybe they still doesn't have fixed yet.

Sent from my XT1580 using Tapatalk

 
fredcom
just joined
Posts: 9
Joined: Thu Jan 18, 2018 7:55 pm

Re: v6.44beta [testing] is released!

Mon Oct 15, 2018 10:09 pm

Thanks for heads up. I think I will eventually end up with this new board, as it seems I've became addicted to Mikrotik tech :)

But anyway, no one has knowledge on where to get new firmware?
 
netispguy
just joined
Posts: 14
Joined: Sun Feb 25, 2018 4:29 am

Re: v6.44beta [testing] is released!

Tue Oct 16, 2018 12:12 am

I really hope that the new iPhone Xs/XsMax 5GHz AC problem is resolved before the 6.44 production release.

viewtopic.php?f=7&t=139608&sid=c8121250 ... cae5c96b71

Who is online

Users browsing this forum: No registered users and 4 guests