Community discussions

 
davidbqzt
just joined
Topic Author
Posts: 4
Joined: Tue Oct 04, 2016 12:29 am

Routing Traffic from one network to other

Fri Oct 12, 2018 7:39 am

Hi, I have the next scenario:

Cloud PBX (159.90.90.90) ---Mikrotik (WAN ETH1: 190.90.90.92/ETH2:192.168.6.1/ETH3:10.90.90.92)----ISP(10.90.90.91)-----SIP Proxy(10.0.0.1)
Static route:
[admin@MikroTik] > ip route print 
Flags: X - disabled, A - active, D - dynamic, 
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, 
B - blackhole, U - unreachable, P - prohibit 
 #      DST-ADDRESS        PREF-SRC        GATEWAY            DISTANCE
 0 A S  0.0.0.0/0                          190.90.90.91            1
 3 A S  10.0.0.1/32                    10.90.90.91             1
 4 ADC  10.90.90.90/30   10.90.90.92   bridge2                   0
 5 ADC  190.90.90.90/29  190.90.90.92  ether1                    0
10 ADC  192.168.6.0/24    192.168.6.1    bridge1                   0
I need to route traffic comming from PBX to sip proxy and vicebersa.

Do you have any idea how to do it?

I've tried some dst-nat, but it didn't work.

Thanks in advance.

David.
 
User avatar
sri2007
Member Candidate
Member Candidate
Posts: 145
Joined: Wed May 20, 2015 10:14 pm
Location: Quito

Re: Routing Traffic from one network to other

Sat Oct 13, 2018 4:24 pm

Hi! I think that you'll need some routes between your devices, can you upload a simple diagram of your network? it may be easiest to understand your problem.

Who is online

Users browsing this forum: jimmydean16 and 4 guests