Community discussions

 
macbeth
just joined
Topic Author
Posts: 3
Joined: Fri Oct 26, 2018 5:08 pm

problem hAP mini as L2 wireless repeater with station bridge

Wed Oct 31, 2018 2:46 pm

I have a problem. I bought a hAP mini to connect it to my hAP ac². I want the mini act as wireless repeater using station bridge mode (L2 wireless bridge). Currently there is connectivity, but wireless clients of the wireless repeater( hAP mini) have really bad performances. Wired clients behave randomly.

hAP mini
hAP ac²


topology is
internet ----- hAP ac² (wireless bridge ) hAP mini

The mini has been configured using webfig. The wireless bridge has been configured using the tool in the wireless section

the hAP mini has 1 bridge with all the interfances:
wlan 1 (station bridge mode)
wlan 2 (ap bridge mode)
eth1
eth2
eth3


Other information:
On the hAP ac² are running other ap bridge interfaces.

The option "bridge" is correclty set on the ap bridge interface I'm connecting to from the hAP mini.

I created all the ap bridge interfaces using default values

Ip configurationon both router is fine and i created a DHCP relay on the hAP mini.


Questions
What am I doing wrong ?

I'm starting to believe that my hAP mini is faulty, is there a way to double check if its radio is working fine ?
 
macbeth
just joined
Topic Author
Posts: 3
Joined: Fri Oct 26, 2018 5:08 pm

Re: problem hAP mini as L2 wireless repeater with station bridge

Sat Nov 10, 2018 9:50 pm

ok... returned my unit, it was faulty.

With the replaced unit I have been able to setup a wireless bridge correctly in a moment.

Who is online

Users browsing this forum: viesturs and 13 guests