currently I try to setup the following on MikroTik RB2011UiAS-2HnD-IN.
1 WAN Uplink on ether1
Ports 2-5 on Switch1 with VLAN-ID 1 untagged
Ports 6-10 on Switch2 with VLAN-ID 2 untagged
WLAN1 with VLAN-ID1 untagged
Virtual-WLAN2 with VLAN-ID2 untagged
DHCP-Server with Network 192.168.2.0/24 on VLAN1
DHCP-Server with Network 192.168.1.0/24 on VLAN2
IP on VLAN1 (Company and MGMT of Router): 192.168.2.1
IP on VLAN2 (Private): 192.168.1.1
No connection between the VLANs (separation of company and private network).
Allow booth VLANs to use the WAN connection on ether1
I'm not able to setup this with a few articles from the internet. Currently it works with 2 bridges only. But this should not be the latest solution.
I hope someone is able to assist here