Community discussions

MikroTik App
 
tselling
just joined
Topic Author
Posts: 1
Joined: Thu Apr 12, 2018 9:35 pm

Please help me get my ARK server working

Wed Dec 26, 2018 5:42 am

I have an ARK Survival Evolved server setup but cannot get the ports to be forwarded correctly (works fine on local lan). One of my son's friends got a new computer and wants to connect to our Ark server but I cannot seem to get the firewall rules working. I have tried a lot of stuff... using/not using in-interface-list vs in-interface, etc. Anyway here is my current config. Any help welcome.

admin@MikroTik] > /ip firewall nat print
Flags: X - disabled, I - invalid, D - dynamic
0 ;;; defconf: masquerade
chain=srcnat action=masquerade out-interface=ether1 out-interface-list=WAN log=no log-prefix="" ipsec-policy=out,none

1 chain=dstnat action=dst-nat to-addresses=192.168.88.33 protocol=tcp in-interface=ether1 in-interface-list=WAN dst-port=25147,27015-27030,27036-27037 log=yes log-prefix="ARK-TCP"

2 chain=dstnat action=dst-nat to-addresses=192.168.88.33 protocol=udp in-interface=ether1 in-interface-list=WAN dst-port=4380,7777-7778,25147,27000-27031,27036 log=yes log-prefix="ARK-UDP"

[admin@MikroTik] > /ip firewall filter print
Flags: X - disabled, I - invalid, D - dynamic
0 D ;;; special dummy rule to show fasttrack counters
chain=forward action=passthrough

1 ;;; defconf: accept established,related,untracked
chain=input action=accept connection-state=established,related,untracked

2 ;;; defconf: drop invalid
chain=input action=drop connection-state=invalid

3 ;;; defconf: accept ICMP
chain=input action=accept protocol=icmp

4 ;;; defconf: drop all not coming from LAN
chain=input action=drop in-interface-list=!LAN

5 ;;; defconf: accept in ipsec policy
chain=forward action=accept ipsec-policy=in,ipsec

6 ;;; defconf: accept out ipsec policy
chain=forward action=accept ipsec-policy=out,ipsec

7 ;;; defconf: fasttrack
chain=forward action=fasttrack-connection connection-state=established,related

8 ;;; defconf: accept established,related, untracked
chain=forward action=accept connection-state=established,related,untracked

9 ;;; defconf: drop invalid
chain=forward action=drop connection-state=invalid

10 ;;; defconf: drop all from WAN not DSTNATed
chain=forward action=drop connection-state=new connection-nat-state=!dstnat in-interface-list=WAN log=yes log-prefix="DROPPED"
 
TheCiscoGuy
Frequent Visitor
Frequent Visitor
Posts: 51
Joined: Fri Jun 22, 2018 8:32 am

Re: Please help me get my ARK server working

Sat Jan 05, 2019 3:55 am

permit your protocol and ports required for the game in the filter section of the firewall, make sure the new rule is at the top of the list
Network Solutions Engineer and Trainer
Cisco | Juniper | Mikrotik | Ubiquiti

Who is online

Users browsing this forum: No registered users and 6 guests