Community discussions

 
roe1974
newbie
Topic Author
Posts: 43
Joined: Mon Dec 31, 2018 2:14 pm

OVPN Help .... 2 tunnels

Mon Dec 31, 2018 4:42 pm

Hi

I need some help.
I have a RB4011 (Router Home) and a LtAP (Router Garage)
Router Home: 192.168.0.0/24
Router garage: 192.168.2.0/24
both are connected with site to site OVPN (172.22.22.1 - 172.22.22.2)
This Network works (both sides see each other for all devices)
Now i sometimes connect to Router Home with my Notebook (OVPN, 192.168.10.1-192.168.10.2)
I have access to all devices from Router Home.
But how i can establish access to the devices behind Router Garage ? Is traffic possible from client tunnel to site-to-site tunnel ?

regards, Richard
 
User avatar
sebastia
Forum Guru
Forum Guru
Posts: 1581
Joined: Tue Oct 12, 2010 3:23 am
Location: Antwerp, BE

Re: OVPN Help .... 2 tunnels

Wed Jan 02, 2019 12:38 am

Hey

It should be possible, just make sure you have the proper routes defined. Mikrotik doesn't support route push, so there are two options: make opvn default route or add route for garage network over ovpn tunnel.
 
roe1974
newbie
Topic Author
Posts: 43
Joined: Mon Dec 31, 2018 2:14 pm

Re: OVPN Help .... 2 tunnels

Wed Jan 02, 2019 11:28 am

I have a static route on Home Router side:

add distance=1 dst-address=192.168.2.0/24 gateway=172.22.22.2

and on Garage Router Side:

add distance=1 dst-address=192.168.0.0/24 gateway=172.22.22.1

This works... but when i now connect to the Home router with my notebook (OVPN tunnel 192.168.10.1-192.168.10.2) i don't come in my garage network......
is a route missing ?

Richard
 
User avatar
CZFan
Forum Guru
Forum Guru
Posts: 1258
Joined: Sun Oct 09, 2016 8:25 pm
Location: South Africa, Randburg
Contact:

Re: OVPN Help .... 2 tunnels

Wed Jan 02, 2019 12:18 pm

Yes, you will have to tell the Garage router where 192.168.10.x network is, i.e. add route like below on Garage router

add distance=1 dst-address=192.168.10.0/24 gateway=172.22.22.1
MTCNA, MTCTCE, MTCRE & MTCINE
 
roe1974
newbie
Topic Author
Posts: 43
Joined: Mon Dec 31, 2018 2:14 pm

Re: OVPN Help .... 2 tunnels

Wed Jan 02, 2019 12:42 pm

Ok, and on the Home Router side (where i come in with my second VPN Tunnel with the Notebook) ... ist there anything to do aditionally ?
i also have on the home router side:

0 chain=srcnat src-address=192.168.0.0/24 dst-address=192.168.2.0/24

and on the garage router side:

0 chain=srcnat src-address=192.168.0.2/24 dst-address=192.168.0.0/24

is there something needed for the 192.168.10.x network ?

thx, Richard!
 
roe1974
newbie
Topic Author
Posts: 43
Joined: Mon Dec 31, 2018 2:14 pm

Re: OVPN Help .... 2 tunnels

Thu Jan 03, 2019 10:39 am

thx CZFan !!!!

it was the missing "add distance=1 dst-address=192.168.10.0/24 gateway=172.22.22.1"

regards, richard
 
User avatar
CZFan
Forum Guru
Forum Guru
Posts: 1258
Joined: Sun Oct 09, 2016 8:25 pm
Location: South Africa, Randburg
Contact:

Re: OVPN Help .... 2 tunnels

Mon Jan 14, 2019 11:38 pm

thx CZFan !!!!

it was the missing "add distance=1 dst-address=192.168.10.0/24 gateway=172.22.22.1"

regards, richard

Pleasure, glad I could help
MTCNA, MTCTCE, MTCRE & MTCINE

Who is online

Users browsing this forum: No registered users and 27 guests