I have searched on the forum but nothing seems to work because they are outdated.
The wiki did not yield anything either. That's why my new topic
I want to configure an 8x WAN load balancing and that did not work.
It also did not work when i testing a 2xWAN load-balancing configuration.
It seemed that the distance failed because when the two internet gateways were connected, gateway 2 was always used.
After a while search, I have downgraded the RouterOs to
6.37.4 bug fix on an old Mikrotik router.
Then the load balancing worked properly.
But I want to make this configuration with the newest 6.44.
This does not seem to be possible after the RouterOS 6.37.4
For clarity this code is made with RouterOS 6.44 on an RB760iGS
What am I doing wrong with this configuration?
Who can help me with a 2x WAN load balancing so that I can finish the 8x WAN configuration/interface bridge
set [ find default-name=ether1 ] name=WAN1
set [ find default-name=ether2 ] name=WAN2
set [ find default-name=ether3 ] name=ether3_lan
set [ find default-name=ether4 ] name=ether4_lan
set [ find default-name=ether5 ] name=ether5_trunk
add name=dhcp_pool0 ranges=192.168.100.2-192.168.100.254
add address-pool=dhcp_pool0 disabled=no interface=bridge-local name=dhcp1
/interface bridge port
add bridge=bridge-local interface=ether3_lan
add bridge=bridge-local interface=ether4_lan
add address=192.168.100.1/24 interface=bridge-local network=192.168.100.0
add add-default-route=no dhcp-options=hostname,clientid disabled=no interface=WAN1 use-peer-dns=no
add add-default-route=no dhcp-options=hostname,clientid disabled=no interface=WAN2 use-peer-dns=no
/ip dhcp-server network
add address=192.168.100.0/24 dns-server=192.168.100.1,220.127.116.11 gateway=192.168.100.1
set allow-remote-requests=yes servers=18.104.22.168,22.214.171.124
/ip dns static
add address=192.168.100.1 name=ns1.uwbedrijf.net
/ip firewall mangle
add action=accept chain=prerouting dst-address=192.168.1.0/24 in-interface=bridge-local
add action=accept chain=prerouting dst-address=10.98.213.0/24 in-interface=bridge-local
add action=mark-connection chain=prerouting connection-mark=no-mark in-interface=WAN1 new-connection-mark=WAN1_conn passthrough=yes
add action=mark-connection chain=prerouting connection-mark=no-mark in-interface=WAN2 new-connection-mark=WAN2_conn passthrough=yes
add action=mark-connection chain=prerouting connection-mark=no-mark dst-address-type=!local in-interface=bridge-local new-connection-mark=WAN1_conn passthrough=yes per-connection-classifier=both-addresses:2/0
add action=mark-connection chain=prerouting connection-mark=no-mark dst-address-type=!local in-interface=bridge-local new-connection-mark=WAN2_conn passthrough=yes per-connection-classifier=both-addresses:2/1
add action=mark-routing chain=prerouting connection-mark=WAN1_conn in-interface=bridge-local new-routing-mark=to_WAN1 passthrough=yes
add action=mark-routing chain=prerouting connection-mark=WAN2_conn in-interface=bridge-local new-routing-mark=to_WAN2 passthrough=yes
add action=mark-routing chain=output connection-mark=WAN1_conn new-routing-mark=to_WAN1 passthrough=yes
add action=mark-routing chain=output connection-mark=WAN2_conn new-routing-mark=to_WAN2 passthrough=yes
/ip firewall nat
add action=masquerade chain=srcnat out-interface=WAN1
add action=masquerade chain=srcnat out-interface=WAN2
add check-gateway=ping distance=1 gateway=192.168.1.1 routing-mark=to_WAN1
add check-gateway=ping distance=2 gateway=10.98.213.20 routing-mark=to_WAN2