Hello,
someone can help me about a RoMON config in Mikrotik?
I have a Mikrotik as firewall linked to a another Mikotik Access Point with a switch HPE OfficeConnect Switch 1920S 24G 2SFP JL381A. The firewall has a dhcp server on ether2 and is linked in he switch. Also the fw has the ether4 with 1 vlan linked in another port in the switch with another dhcp server (for vlan). Al dhcp server and vlan are managed with the bridge config, so for example i have created a vlan (on ether4) and then a bridge called bridge-vlan with the vlan created before into.
The AP has 2 dhcp client and receive the ip from the lan (ether2) and the vlan net (ether4 from fw).
I configured the switch to manage the vlan, and the AP have the 2 ips correctly.
My question is... why the RoMON service doesn't work?
PS: If I connect directly the AP for example at the ether3 of the fw the romon works.
Someone have any idea?
Seem that the switch doesn't pass the romon packets, but all networks work great.
Thanks.