Community discussions

MikroTik App
 
User avatar
emils
Forum Veteran
Forum Veteran
Topic Author
Posts: 906
Joined: Thu Dec 11, 2014 8:53 am

v6.43.13 [long-term] is released!

Wed Mar 20, 2019 2:51 pm

RouterOS version 6.43.13 has been released in public "long-term" channel!

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

What's new in 6.43.13 (2019-Mar-13 11:27):

*) bridge - count routed FastPath packets between bridge ports under FastPath bridge statistics;
*) bridge - fixed BOOTP packet forwarding when DHCP Snooping is enabled;
*) bridge - fixed packet forwarding with enabled DHCP Snooping and Option 82;
*) bridge - fixed possible memory leak when using "ingress-filtering=yes" on bridge interface;
*) bridge - fixed system's identity change when DHCP Snooping is enabled (introduced in v6.43);
*) capsman - always accept connections from loopback address;
*) certificate - force 3DES encryption for P12 certificate export;
*) dhcp - fixed dual stack queue addition;
*) dhcpv6-server - allow to add DHCPv6 server with pool that does not exist;
*) dhcpv6-server - fixed missing gateway for binding's network if RADIUS authentication was used;
*) ethernet - added "tx-rx-1024-max" counter to Ethernet stats;
*) ethernet - fixed packet forwarding when SFP interface is disabled on hEX S;
*) fetch - improved file downloading to slow memory;
*) gps - increase precision for dd format;
*) gps - removed unnecessary leading "0" for dd format;
*) ipsec - fixed all policies not getting installed after startup (introduced in v6.43.8);
*) ipsec - fixed stability issues after changing peer configuration (introduced in v6.43);
*) ipv6 - do not allow setting "preferred-lifetime" longer than "valid-lifetime";
*) kidcontrol - added "tur-fri", "tur-mon", "tur-sat", "tur-sun", "tur-thu", "tur-tue", "tur-wed" parameters;
*) kidcontrol - fixed validation checks for time intervals;
*) led - fixed default LED configuration for RBSXTsq-60ad;
*) lldp - fixed missing capabilities fields on some devices;
*) lte - do not show "session-uptime" if session is not up;
*) lte - improved SIM7600 initialization after reset;
*) netinstall - do not show kernel failure critical messages in the log after fresh install;
*) ntp-client - fixed "dst-active" and "gmt-offset" being updated after synchronization with server;
*) ppp - fixed dynamic route creation towards VPN server when "add-default-route" is used;
*) rb4011 - fixed ether10 failing to auto negotiate link speed to 1Gbps;
*) smb - added commenting option for SMB users (CLI only);
*) smb - fixed macOS clients not showing share contents;
*) smb - fixed Windows 10 clients not able to establish connection to share;
*) ssh - close active SSH connections before IPsec connections on shutdown;
*) supout - fixed "poe-out" output not showing all interfaces;
*) supout - fixed Profile output on single core devices;
*) winbox - added "conflict-detection" parameter in "IP/DHCP Server" menu;
*) winbox - added "coordinate-format" parameter in LTE interface settings;
*) winbox - added "use-local-address" parameter in "IP/Cloud" menu;
*) winbox - allow specifying interface lists in "CAPsMAN/Access List" menu;
*) winbox - fixed "IPv6/Firewall" "Connection limit" parameter not allowing complete IPv6 prefix lengths;
*) winbox - fixed "LCD" menu not shown on RB2011UiAS-2HnD;
*) winbox - moved "Too Long" statistics counter to Ethernet "Rx Stats" tab;
*) winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;
*) wireless - fixed antenna gain setting on RBSXT5nDr2;
*) wireless - improved antenna gain setting for devices with built in antennas;
*) wireless - improved AR5212 response to incoming ACK frames;
*) wireless - improved connection stability for new model Apple devices;

To upgrade, click "Check for updates" at /system package in your RouterOS configuration interface, or head to our download page: http://www.mikrotik.com/download

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after some problem has appeared on device

Please keep this forum topic strictly related to this specific RouterOS release.
 
whatever
Member
Member
Posts: 348
Joined: Thu Jun 21, 2018 9:29 pm

Re: v6.43.13 [long-term] is released!

Wed Mar 20, 2019 6:01 pm

Is it safe to downgrade from 6.44?
Edit: Did it, appears to work fine.
Last edited by whatever on Fri Mar 22, 2019 12:20 am, edited 1 time in total.
 
105547111
Member Candidate
Member Candidate
Posts: 135
Joined: Fri Jun 22, 2012 9:46 pm

Re: v6.43.13 [long-term] is released!

Thu Mar 21, 2019 1:59 am

Is it safe to downgrade from 6.44?
I downgraded 1 x CCR 1016 12G, 3 x CRS 125s, 5 x RB951G and 2 x WaP60Gs to 6.42.12 no issues at all on downgrade, I'd assume 6.43.13 be the same...

No issues at all either with 6.42.12 to 6.43.13

Cheers!
 
Traveller
newbie
Posts: 35
Joined: Thu Apr 05, 2018 10:12 am

Re: v6.43.13 [long-term] is released!

Thu Mar 21, 2019 8:48 am

New DDNS cloud server - it's good :) .
 
User avatar
BrianHiggins
Forum Veteran
Forum Veteran
Posts: 702
Joined: Mon Jan 16, 2006 6:07 am
Location: Norwalk, CT
Contact:

Re: v6.43.13 [long-term] is released!

Thu Mar 21, 2019 6:05 pm

Unable to change default username for admin account (or any account), command line gives error "failure: user name can't be changed" and winbox options are disabled.

/user set admin name=somethingelse password=mypass comment="changed default account"
failure: user name can't be changed
 
User avatar
Jotne
Forum Guru
Forum Guru
Posts: 3279
Joined: Sat Dec 24, 2016 11:17 am
Location: Magrathean

Re: v6.43.13 [long-term] is released!

Thu Mar 21, 2019 6:08 pm

I guess you are logged inn with the user you try to change.
Create a new user, log inn with new user, then change admin user.
Last edited by Jotne on Fri Mar 22, 2019 5:04 pm, edited 1 time in total.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1764
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.43.13 [long-term] is released!

Thu Mar 21, 2019 6:29 pm

You can't change username anymore, if you need different username create new, and delete old one.
This is feature, not a bug.
 
User avatar
BrianHiggins
Forum Veteran
Forum Veteran
Posts: 702
Joined: Mon Jan 16, 2006 6:07 am
Location: Norwalk, CT
Contact:

Re: v6.43.13 [long-term] is released!

Thu Mar 21, 2019 7:40 pm

You can't change username anymore, if you need different username create new, and delete old one.
This is feature, not a bug.
I disagree, it's a bug. Proof: where is this in any changelog? (because I looked before posting, twice)
 
nescafe2002
Forum Veteran
Forum Veteran
Posts: 897
Joined: Tue Aug 11, 2015 12:46 pm
Location: Netherlands

Re: v6.43.13 [long-term] is released!

Thu Mar 21, 2019 7:52 pm

viewtopic.php?f=2&t=139091&p=685725#p685742

Make a new user, then re-login. There are big security changes in last versions, rename is no longer possible.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1764
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.43.13 [long-term] is released!

Fri Mar 22, 2019 8:42 am

You can't change username anymore, if you need different username create new, and delete old one.
This is feature, not a bug.
I disagree, it's a bug. Proof: where is this in any changelog? (because I looked before posting, twice)
v6.43 changelog
*) user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades); 
 
djdrastic
Member
Member
Posts: 367
Joined: Wed Aug 01, 2012 2:14 pm

Re: v6.43.13 [long-term] is released!

Fri Mar 22, 2019 10:34 am

Hmmmm

It's good that these steps have been taken to encrypt local user passwords the only issue is we had jinja2 scripts creating config that essentially renamed the local admin to a site/customer specific username for rollout.

Will have to play around and see what to do now . Probably create a new user account and delete/disable the old admin account ?


Thanks for the heads up @macgaiver
 
VipITBE
just joined
Posts: 23
Joined: Tue Apr 02, 2013 10:40 am

Re: v6.43.13 [long-term] is released!

Fri Mar 22, 2019 10:51 am

Hmmmm

It's good that these steps have been taken to encrypt local user passwords the only issue is we had jinja2 scripts creating config that essentially renamed the local admin to a site/customer specific username for rollout.

Will have to play around and see what to do now . Probably create a new user account and delete/disable the old admin account ?


Thanks for the heads up @macgaiver
because reading an entire thread is too hard: viewtopic.php?f=2&t=139091&p=685725#p685742
 
djdrastic
Member
Member
Posts: 367
Joined: Wed Aug 01, 2012 2:14 pm

Re: v6.43.13 [long-term] is released!

Fri Mar 22, 2019 11:19 am

Just read that thanks

Will have to radically alter that script of vecernik87 for the build environment.
 
User avatar
vecernik87
Forum Veteran
Forum Veteran
Posts: 882
Joined: Fri Nov 10, 2017 8:19 am

Re: v6.43.13 [long-term] is released!

Fri Mar 22, 2019 11:44 am

That was just an example :) but at least you can see it is possible and not that complicated :)
 
djdrastic
Member
Member
Posts: 367
Joined: Wed Aug 01, 2012 2:14 pm

Re: v6.43.13 [long-term] is released!

Fri Mar 22, 2019 12:11 pm

That was just an example :) but at least you can see it is possible and not that complicated :)
Thx for the script mate.Helps a bunch.
 
Swordforthelord
Frequent Visitor
Frequent Visitor
Posts: 71
Joined: Thu Jul 08, 2010 10:18 pm

Re: v6.43.13 [long-term] is released!

Fri Mar 22, 2019 4:26 pm

I have a 450G and a 750Gr3 that have had this error since upgrading:

"backup,critical error creating backup file: could not read all configuration files"

It happens with both encrypted and unencrypted backups; both were upgraded from 6.42.12. My 951G that was upgraded from 6.43.12 does not have this issue. Is anyone else experiencing this?
 
User avatar
eworm
Forum Guru
Forum Guru
Posts: 1070
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.43.13 [long-term] is released!

Fri Mar 22, 2019 4:29 pm

I have a 450G and a 750Gr3 that have had this error since upgrading:

"backup,critical error creating backup file: could not read all configuration files"

It happens with both encrypted and unencrypted backups; both were upgraded from 6.42.12. My 951G that was upgraded from 6.43.12 does not have this issue. Is anyone else experiencing this?
Try to regenerate the ssh host keys:
/ ip ssh regenerate-host-key
 
Swordforthelord
Frequent Visitor
Frequent Visitor
Posts: 71
Joined: Thu Jul 08, 2010 10:18 pm

Re: v6.43.13 [long-term] is released!

Fri Mar 22, 2019 5:01 pm

I have a 450G and a 750Gr3 that have had this error since upgrading:

"backup,critical error creating backup file: could not read all configuration files"

It happens with both encrypted and unencrypted backups; both were upgraded from 6.42.12. My 951G that was upgraded from 6.43.12 does not have this issue. Is anyone else experiencing this?
Try to regenerate the ssh host keys:
/ ip ssh regenerate-host-key
Thanks, that fixed it!
 
DJGlooM
newbie
Posts: 45
Joined: Thu May 15, 2014 2:28 am

Re: v6.43.13 [long-term] is released!

Sat Mar 23, 2019 9:12 am

Is everything okay there with winbox-router communication? When I open winbox session on previous RouterOS versions it takes like 1-2 seconds to establish session, now with 6.43.13 it happens instantly. It feels like there could be broken encryption or something. So I wonder if bug or feature.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.43.13 [long-term] is released!

Sat Mar 23, 2019 2:28 pm

Is "previous" version 6.43.12 or some other one?
 
storp
Frequent Visitor
Frequent Visitor
Posts: 56
Joined: Tue Nov 24, 2015 2:53 pm

Re: v6.43.13 [long-term] is released!

Sat Mar 23, 2019 7:46 pm

Is "previous" version 6.43.12 or some other one?
You mean previous long-term? That should be 6.42.11 I think.
 
DJGlooM
newbie
Posts: 45
Joined: Thu May 15, 2014 2:28 am

Re: v6.43.13 [long-term] is released!

Sat Mar 23, 2019 9:48 pm

You mean previous long-term? That should be 6.42.11 I think.
6.42.12
 
DJGlooM
newbie
Posts: 45
Joined: Thu May 15, 2014 2:28 am

Re: v6.43.13 [long-term] is released!

Sat Mar 23, 2019 9:50 pm

Is "previous" version 6.43.12 or some other one?
Any previous version. Is there only myself who noticed that winbox connection became instant which it wasn't before?
 
Kindis
Member
Member
Posts: 434
Joined: Tue Nov 01, 2011 6:54 pm
Location: Sweden

Re: v6.43.13 [long-term] is released!

Sun Mar 24, 2019 9:44 am

The fast connection of winbox was part of a release where they improved and secured the connection. Might have been 6.43 release. I do not remember but I do remember a lot of happy people talking about how quick it is now 😊
So the connection of both faster and more secure now.
 
DJGlooM
newbie
Posts: 45
Joined: Thu May 15, 2014 2:28 am

Re: v6.43.13 [long-term] is released!

Mon Mar 25, 2019 9:08 am

The fast connection of winbox was part of a release where they improved and secured the connection. Might have been 6.43 release. I do not remember but I do remember a lot of happy people talking about how quick it is now 😊
So the connection of both faster and more secure now.
Oh nice! Finally something was improved and not broken!
 
User avatar
BrianHiggins
Forum Veteran
Forum Veteran
Posts: 702
Joined: Mon Jan 16, 2006 6:07 am
Location: Norwalk, CT
Contact:

Re: v6.43.13 [long-term] is released!

Mon Mar 25, 2019 7:22 pm

You can't change username anymore, if you need different username create new, and delete old one.
This is feature, not a bug.
I disagree, it's a bug. Proof: where is this in any changelog? (because I looked before posting, twice)
v6.43 changelog
*) user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
ok, I now see the post I missed before where Normis says this, but the hashed & encrypted changelog does NOT say anything about changing usernames, so I still stand by the fact that it's "officially/technically" a bug, since there is still NO official reference to this anywhere but a blog post :roll: ....

As with others this came up as part of a deployment script that expected to rename the admin account, where it needs to now remove and replace the admin account. Easy enough if you're working with devices locally, but this script gets pushed out automatically to devices across the country, so any failure in these scripts results in a RMA warranty claim and shipping costs to repair / replace the device.
 
deanMKD1
Member
Member
Posts: 366
Joined: Fri Dec 12, 2014 12:06 am
Location: Macedonia
Contact:

Re: v6.43.13 [long-term] is released!

Mon Mar 25, 2019 7:34 pm

Is it safe to downgrade from 6.44?
Edit: Did it, appears to work fine.
Tryed to downgrade from 6.44 stable to this release, but after reboot still show me 6.44 stable.. Seems like its not posible to downgrade to this longterm version.
 
andriys
Forum Guru
Forum Guru
Posts: 1526
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: v6.43.13 [long-term] is released!

Mon Mar 25, 2019 9:23 pm

Tryed to downgrade from 6.44 stable to this release, but after reboot still show me 6.44 stable.. Seems like its not posible to downgrade to this longterm version.
What's in the log? What is the factory firmware version?
 
yacsap
Member Candidate
Member Candidate
Posts: 121
Joined: Wed Dec 17, 2014 11:44 am
Location: the land of the long white cloud
Contact:

Re: v6.43.13 [long-term] is released!

Tue Mar 26, 2019 1:34 am

Is it safe to downgrade from 6.44?
Edit: Did it, appears to work fine.
I downgraded 2 of my CCR1009-7G-1C-1S+, RB2011RMUi-AS, RB3011RMUi-AS, and heaps of RB951G-2HnD, all of them are working perfectly fine :)
 
User avatar
Deantwo
Member
Member
Posts: 331
Joined: Tue Sep 30, 2014 4:07 pm

Re: v6.43.13 [long-term] is released!

Tue Mar 26, 2019 11:57 am

So are there actually any changes between this long-term version and the v6.43.12 stable version? Really hard to tell from the changes, since as mentioned by others in this thread, there are even changes missing that were made in the v6.43 release thread.

PS: Emailed support about adding the missing user change to the changes list.

EDIT: Got reply from support that all the changes in this release are changes between v6.43.12 and v6.43.13. So that would explain the missing entries on the changes list. Don't remember this being how bugfig/long-term patch notes are written, but whatever.
Last edited by Deantwo on Tue Mar 26, 2019 4:06 pm, edited 1 time in total.
 
fback
just joined
Posts: 4
Joined: Thu Jan 29, 2015 1:42 pm

Re: v6.43.13 [long-term] is released!

Tue Mar 26, 2019 3:49 pm

As 6.43 just recently replaced 6.42 long-term.

radius - use MS-CHAPv2 for "login" service authentication;

Please revert this change, or at least make this configurable.

Rationale:
This is great when you use your radius to authenticate both wireless clients and admin access. But with a network, where radius is used just to authorize admin access to devices (or with separate radius service for network admin access), this is a very bad change. You basically have to move from simple, eg. PAM-based password verification (and group membership) to something AD based (either real MS AD or SAMBA4) so you can provide RC4 / NTLM infrastructure.

Regards,
b.
 
User avatar
Deantwo
Member
Member
Posts: 331
Joined: Tue Sep 30, 2014 4:07 pm

Re: v6.43.13 [long-term] is released!

Tue Mar 26, 2019 4:19 pm

As 6.43 just recently replaced 6.42 long-term.

radius - use MS-CHAPv2 for "login" service authentication;

Please revert this change, or at least make this configurable.
That is true, and yet another thing people upgrading from v6.42.12 to v6.43.13 will be unprepared for.
But all is not lost. If you upgrade your RADIUS server first, it will be backward compatible for older RouterOS version (for WinBox at least, weirdly not for Telnet).

See: viewtopic.php?f=2&t=144726
 
deanMKD1
Member
Member
Posts: 366
Joined: Fri Dec 12, 2014 12:06 am
Location: Macedonia
Contact:

Re: v6.43.13 [long-term] is released!

Tue Mar 26, 2019 6:12 pm

Tryed to downgrade from 6.44 stable to this release, but after reboot still show me 6.44 stable.. Seems like its not posible to downgrade to this longterm version.
What's in the log? What is the factory firmware version?
Factory is 6.42.3. Current is 6.44 Stable.

This is message from log..

Image
 
User avatar
eworm
Forum Guru
Forum Guru
Posts: 1070
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.43.13 [long-term] is released!

Tue Mar 26, 2019 6:30 pm

Tryed to downgrade from 6.44 stable to this release, but after reboot still show me 6.44 stable.. Seems like its not posible to downgrade to this longterm version.
What's in the log? What is the factory firmware version?
Factory is 6.42.3. Current is 6.44 Stable.

This is message from log..

Image
Did you actually run
/system package downgrade
to downgrade? RouterOS will not downgrade on its own when just rebooting.
 
deanMKD1
Member
Member
Posts: 366
Joined: Fri Dec 12, 2014 12:06 am
Location: Macedonia
Contact:

Re: v6.43.13 [long-term] is released!

Tue Mar 26, 2019 8:59 pm

Tryed to downgrade from 6.44 stable to this release, but after reboot still show me 6.44 stable.. Seems like its not posible to downgrade to this longterm version.
What's in the log? What is the factory firmware version?
Factory is 6.42.3. Current is 6.44 Stable.

This is message from log..

Image
Did you actually run
/system package downgrade
to downgrade? RouterOS will not downgrade on its own when just rebooting.
No i used method to upload firmware to rooter root dir, and then tryed to reboot. I have upgraded all my routers in the past via that way.

EDIT: When upload long-term firmware and run your command from terminal, finally downgraded to long-term version. Works perfectly now !
No i used method to upload firmware to rooter root dir, and then tryed to reboot. I have upgraded all my routers in the past via that way.

To upgrade, simply upliading new package files is fine. To downgrade, one has to follow procedure described by @eworm
yes that makes the magic. i dont knowed that. Just learned something new. Many thanks !!!
Last edited by deanMKD1 on Tue Mar 26, 2019 9:08 pm, edited 2 times in total.
 
User avatar
mkx
Forum Guru
Forum Guru
Posts: 11383
Joined: Thu Mar 03, 2016 10:23 pm

Re: v6.43.13 [long-term] is released!

Tue Mar 26, 2019 9:05 pm

No i used method to upload firmware to rooter root dir, and then tryed to reboot. I have upgraded all my routers in the past via that way.

To upgrade, simply upliading new package files is fine. To downgrade, one has to follow procedure described by @eworm
 
User avatar
cmdorexe
just joined
Posts: 12
Joined: Sun Sep 11, 2016 1:12 pm
Location: Nizhny Novgorod, Russia

Re: v6.43.13 [long-term] is released!

Fri Mar 29, 2019 12:54 pm

RB3011 Long-term release 6.43.13 dhcp-server not working! CPU load 100% all times. WinBox droped me many times. Only when I stop all WAN connections downgrade it. 6.42.10 stable on RB3011.
Das 6.43.13 longterm?
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.43.13 [long-term] is released!

Fri Mar 29, 2019 3:27 pm

CPU load 100% all times.
Which facility? Tools -> Profile. Because it can be DNS :)
 
User avatar
cmdorexe
just joined
Posts: 12
Joined: Sun Sep 11, 2016 1:12 pm
Location: Nizhny Novgorod, Russia

Re: v6.43.13 [long-term] is released!

Fri Mar 29, 2019 5:01 pm

Which facility?
Can't test it again. DNS using white list with drop RAW.
 
sindudas
newbie
Posts: 36
Joined: Thu Aug 16, 2012 2:59 pm

Re: v6.43.13 [long-term] is released!

Fri Mar 29, 2019 6:19 pm

I think there is a Bug that wasn't in 6.42.12:

Running that command on 6.42.12 works:
:log info ([/interface pppoe-client monitor pppoe-WAN as-value]->"status")
but when running the same on 6.43.13 it doens't end executing that command.
But if you try this it works:
/interface pppoe-client monitor pppoe-WAN
There's something wrong in 6.43.13 ? (I don't know if other 6.43.x does the same, using long-term and jumped from 6.42.12 to 6.43.13)
 
McSee
Frequent Visitor
Frequent Visitor
Posts: 84
Joined: Tue Feb 26, 2019 12:49 pm

Re: v6.43.13 [long-term] is released!

Fri Mar 29, 2019 10:33 pm

I think there is a Bug that wasn't in 6.42.12:

Running that command on 6.42.12 works:
:log info ([/interface pppoe-client monitor pppoe-WAN as-value]->"status")
It's not a bug it's a feature :)
Now you need to add "once" after an interface name.
 
User avatar
Aberanta
just joined
Posts: 3
Joined: Thu Oct 22, 2009 12:14 am
Location: Valladolid / Spain

Re: v6.43.13 [long-term] is released!

Fri Mar 29, 2019 11:02 pm

Maybe always was this way but I just notice that, in winbox, the comment column in ipv6 firewall is missing. The comments shows if I disable "Inline Comments" in winbox settings and in terminal "/ipv6 firewall filter print" works fine.
 
sindudas
newbie
Posts: 36
Joined: Thu Aug 16, 2012 2:59 pm

Re: v6.43.13 [long-term] is released!

Mon Apr 01, 2019 11:30 am

I think there is a Bug that wasn't in 6.42.12:

Running that command on 6.42.12 works:
:log info ([/interface pppoe-client monitor pppoe-WAN as-value]->"status")
It's not a bug it's a feature :)
Now you need to add "once" after an interface name.
This seems like some kind of joke. This change has broken our brand customization package. It was working since v6.27.
 
User avatar
Deantwo
Member
Member
Posts: 331
Joined: Tue Sep 30, 2014 4:07 pm

Re: v6.43.13 [long-term] is released!

Mon Apr 01, 2019 12:39 pm

I think there is a Bug that wasn't in 6.42.12:

Running that command on 6.42.12 works:
:log info ([/interface pppoe-client monitor pppoe-WAN as-value]->"status")
It's not a bug it's a feature :)
Now you need to add "once" after an interface name.
This seems like some kind of joke. This change has broken our brand customization package. It was working since v6.27.
Not a joke. It is mentioned in the v6.43 change log.
Here: viewtopic.php?f=21&t=138995
*) console - made "once" parameter mandatory when using "as-value" on "monitor" commands;
 
User avatar
emils
Forum Veteran
Forum Veteran
Topic Author
Posts: 906
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.43.13 [long-term] is released!

Thu Apr 04, 2019 10:55 am

New version 6.43.14 has been released in long-term RouterOS channel:

viewtopic.php?f=21&t=147278

Who is online

Users browsing this forum: Mahesh, mszru and 26 guests