Community discussions

MUM Europe 2020
 
jayk
newbie
Topic Author
Posts: 44
Joined: Thu Dec 20, 2007 9:04 pm

Port Will Not Negotiate 1Gbps

Tue Apr 02, 2019 7:36 pm

I have a Ubiquiti AirFiber backhaul unit plugged into a port on my MikroTik CRS326-24G-2S+ switch. It will not keep the LAN speed at 1Gbps. It will start out that way for about 5 minutes, when first plugged in then it goes back to 100Mbps. Is this a problem with the hardware between Ubiquiti and MikroTik? I have replaced the unit with a new one of the same brand and model and still get the same results. Or is it more likely some setting I have not got configured correctly? Any help would be appreciated.
Thanks ... Jay
 
User avatar
jprietove
Trainer
Trainer
Posts: 96
Joined: Fri Jun 03, 2016 3:00 pm
Location: Cádiz, Spain
Contact:

Re: Port Will Not Negotiate 1Gbps

Tue Apr 02, 2019 8:28 pm

I've used that configuration lots of time. No problem at all. Look your cables, connectors, etc. It should be almost 'plug and play'
 
User avatar
Steveocee
Forum Guru
Forum Guru
Posts: 1110
Joined: Tue Jul 21, 2015 10:09 pm
Location: UK
Contact:

Re: Port Will Not Negotiate 1Gbps

Wed Apr 03, 2019 3:52 pm

What PoE are you using? Air Fibres in my experience can be a bit touchy.
Steve "Steveocee" Carter
PC Gamer, Airsofter, MikroTik Nerd
My Website - My MikroTik Tutorials
 
Tower3
just joined
Posts: 2
Joined: Thu Oct 04, 2018 1:00 pm
Location: Krugerdorp, South Africa
Contact:

Re: Port Will Not Negotiate 1Gbps

Wed Apr 03, 2019 4:26 pm

Hello
i battled with the same thing many time and found the following. Gigabit uses all 8 wires on the cat5-6 cable, Also ensure your earth strand has proper contact to the shielded Rj45. In some instances we soldered the earth strand which fixed the problem. Lastly make sure you have proper voltage to the dish, longer cable runs will require a higher voltage to overcome voltage drops.

Hope it helps
 
jayk
newbie
Topic Author
Posts: 44
Joined: Thu Dec 20, 2007 9:04 pm

Re: Port Will Not Negotiate 1Gbps

Wed Apr 03, 2019 4:59 pm

What PoE are you using? Air Fibres in my experience can be a bit touchy.
I am using the PoE that came with the AirFiber units.
 
neutronlaser
Member Candidate
Member Candidate
Posts: 212
Joined: Thu Jan 18, 2018 5:18 pm

Re: Port Will Not Negotiate 1Gbps

Wed Apr 03, 2019 11:53 pm

Use cable tester

Who is online

Users browsing this forum: No registered users and 19 guests