I'm running a central MT router with two wireless cards in it. One side it connects to a range of other MT routers creating a hotzone, and on the otherside it links up to one of my other networks which is configured in the same way. Inside each "hotzone" I've got several DSL lines connected to the sub beacan and I've created a PPPoE connection to the internet. From the main MT router I use a pppoe server to do authentication for my clients and I create a PPTP tunnel to each sub beacan which have the DSL. From the main beacan I load balance between the PPTP links as breakout points. The problem I'm having is that the main beacan will loose it's PPTP and PPPoE connections to the sub beacons. When I say loose, it's as they have been deleted from the system. Firewall rules turn red, routing goes blue and so forth. The funny thing is, that my users can still authenticate with is happening from a remote radius server. For the router to see the radius server, it needs internet connectivety, but all the connections to DSL lines are gone. So you can authenticate, but not browse or anything. If you reboot the router, all is fine again. Could anyone please help me on this.