Some SFP+ ports pull close to 10G and others cant get better then 10M with high package loss.
Verified good SPF+ AOC and DAC, Test with 6 new cable same results
Purchased 2nd CRS317 Issue still present but between the 2 of them the ports with issues changed
Factory default settings
Updated Firmware and OS to 6.45.7
Tech support suggested verifying "Make sure that "/interface bridge port print" shows "H" flag on the ports you are testing through." as that's default setting they are.
Tried manually setting 10G vs auto negotiate no change
Disabled all ports test one at a time no change
Pulled all my hair out no change
2xAquantia AQtion SFP+ NIC, 10G Ethernet Network Adapter
Any and all suggesting welcome!!!
At this point I'm close to shipping all my MikroTik hardware back and paying premium for a big box name that will just work. But would love to work through these issues.
CCRR1016-12S-1S+(router) over SFP+ to CRS317-1G-16S+(Switch) feeding RB4011iGs+5HacQ2HnD(AP) and 2x CRS328-24P-4S+RM(Switch)