Here is me screen for x86 whit activate 64 bitsDear Mikrotik team,
it seems you have enabled 64-bit support on the x86 platform. The command /system/hardware/print shows:
If you enable 64-bit support and reboot it correctly enables it, see the memory:Code: Select allmulti-cpu: yes allow-x86-64: no
But if you do that the wireless support gets disabled, so I guess it isn't actually supported. Here you said it shouldn't be possible to enable it on the x86 platform.Code: Select alluptime: 2m20s version: 7.0beta3 (development) build-time: Oct/22/2019 09:34:17 free-memory: 3860.7MiB total-memory: 3904.0MiB cpu: Intel(R) cpu-count: 2 cpu-frequency: 1166MHz cpu-load: 0% free-hdd-space: 110.8GiB total-hdd-space: 110.8GiB write-sect-since-reboot: 424 write-sect-total: 424 architecture-name: x86_64 board-name: x86 platform: MikroTik
Thanks!