Routers are connected by a 1M ethernet patch cable. Both running 6.44.5. Both have uptime of 130 days. OSPF config is about as simple as it gets and is unchanged in the 4-5 years these routers (and their predecessors) have been in service.
Router 1 (CCR1036-8G-2S+):
Code: Select all
/routing ospf instance
set [ find default=yes ] distribute-default=always-as-type-1 redistribute-connected=as-type-1 redistribute-static=as-type-1 router-id=172.23.0.1
/routing ospf network
add area=backbone network=123.45.67.89/30
...
dec/01 21:01:44 route,ospf,info Database Description packet has init bit set in middle of an exchange
dec/01 21:01:44 route,ospf,info OSPFv2 neighbor 172.23.0.2: state change from Full to 2-Way
dec/01 21:02:29 route,ospf,info OSPFv2 neighbor 172.23.0.2: state change from Exchange to 2-Way
dec/01 21:03:09 route,ospf,info OSPFv2 neighbor 172.23.0.2: state change from Exchange to 2-Way
dec/01 21:03:50 route,ospf,info OSPFv2 neighbor 172.23.0.2: state change from Exchange to 2-Way
dec/01 21:04:32 route,ospf,info OSPFv2 neighbor 172.23.0.2: state change from Exchange to 2-Way
dec/01 21:05:13 route,ospf,info OSPFv2 neighbor 172.23.0.2: state change from Exchange to 2-Way
dec/01 21:05:54 route,ospf,info OSPFv2 neighbor 172.23.0.2: state change from Exchange to 2-Way
dec/01 21:06:35 route,ospf,info OSPFv2 neighbor 172.23.0.2: state change from Exchange to 2-Way