Community discussions

MikroTik App
 
davidw
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 91
Joined: Fri Apr 27, 2007 11:11 pm

Isolating Wireless Clients in Hotspot

Fri Apr 27, 2007 11:20 pm

Hi There,

I have a hotspot setup in the following configuration.

Wirless DHCP pool for wireless clients - 10.5.50.2-10.5.50.254
Lan interface on the hotspot is - 192.168.1.1
Adsl router is 192.168.1.254

I want to make sure that the wireless clients that connect to can not communicate with each other.

eg somone on 10.5.50.254 can not ping 10.5.50.253

I tried setting up the following rule but it did not work.

Src ip: 10.5.50.2-10.5.50.254
Dst IP: 10.5.50.2-10.5.50.254
Action Drop

Any ideas ????
 
GotNet
Member
Member
Posts: 436
Joined: Fri May 28, 2004 7:52 pm
Location: Florida

Sat Apr 28, 2007 4:49 am

Disable "default foward" in WinBox or set default forwarding=no in command line.
 
davidw
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 91
Joined: Fri Apr 27, 2007 11:11 pm

Sat Apr 28, 2007 11:01 am

This worked up until a user logged in.

I found that I had to include the firewall rules as well to make it work
 
pam
just joined
Posts: 2
Joined: Wed May 09, 2007 3:34 pm

Wed May 09, 2007 3:45 pm

Can you show an example hot to set that up, we need to deploy a working hotspot realy fast, and we need to isolate co client to client communication + shared folders etc.

Regards
 
davidw
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 91
Joined: Fri Apr 27, 2007 11:11 pm

Fri May 11, 2007 10:44 am

Pam Go into IP - Firewall - Add a Rule - General Tab

For both SRC Address and DST Address enter the following

10.5.50.2-10.5.50-254

On the action tab select DROP

Thats it !

Who is online

Users browsing this forum: arkos, Bing [Bot], danmiles86 and 115 guests