Hi, I am trying to set up graphing for my home connection but I am unable to view.
I have tried https://publicIP/graphs and also just https://publicIP to get to the webfig but pages do not show.
config is as follows:
/tool graphing interface> pri
Flags: X - disabled
# INTERFACE ALLOW-ADDRESS STORE-ON-DISK
0 all 0.0.0.0/0 yes
All I can think of is maybe there are firewall rules preventing it, but I am not very good with these, could somebody take a look please?
Firewall rules:
0 D ;;; special dummy rule to show fasttrack counters
chain=forward
1 ;;; defconf: accept establieshed,related
chain=input action=accept connection-state=established,related log=no log-prefix=""
2 ;;; defconf: drop all from WAN
chain=input action=drop in-interface=PoE log=no log-prefix=""
3 ;;; defconf: fasttrack
chain=forward action=fasttrack-connection connection-state=established,related log=no log-prefix=""
4 ;;; defconf: accept established,related
chain=forward action=accept connection-state=established,related log=no log-prefix=""
5 ;;; defconf: drop invalid
chain=forward action=drop connection-state=invalid log=no log-prefix=""
6 ;;; defconf: drop all from WAN not DSTNATed
chain=forward action=drop connection-state=new connection-nat-state=!dstnat in-interface=WAN log=no log-prefix=""
7 ;;; Allow Limited Pings
chain=input action=accept protocol=icmp limit=50/5s,2:packet log=no log-prefix=""
8 chain=output action=accept protocol=tcp content=530 Login Incorrect dst-limit=1/1m,9,dst-address/1m log=no log-prefix=""
9 chain=output action=add-dst-to-address-list protocol=tcp address-list=ftp_blacklist address-list-timeout=3h content=530 Login Incorrect log=no log-prefix=""
10 ;;; Drop Excess Pings
chain=input action=drop protocol=icmp log=no log-prefix=""
11 ;;; Drop Brute Forcers
chain=input action=drop protocol=tcp src-address-list=ssh_blacklist dst-port=22 log=no log-prefix=""
12 chain=input action=add-src-to-address-list connection-state=new protocol=tcp src-address-list=ssh_stage3 address-list=ssh_blacklist address-list-timeout=1w3d dst-port=22 log=no log-prefix=""
13 chain=input action=add-src-to-address-list connection-state=new protocol=tcp src-address-list=ssh_stage2 address-list=ssh_stage3 address-list-timeout=1m dst-port=22 log=no log-prefix=""
14 chain=input action=add-src-to-address-list connection-state=new protocol=tcp src-address-list=ssh_stage1 address-list=ssh_stage2 address-list-timeout=1m dst-port=22 log=no log-prefix=""
15 ;;; SSH Create Blacklist
chain=input action=add-src-to-address-list connection-state=new protocol=tcp address-list=ssh_stage1 address-list-timeout=1m dst-port=22 log=no log-prefix=""
16 ;;; SSH
chain=input action=accept protocol=tcp dst-port=22 log=no log-prefix=""
17 ;;; Drop Invalid Connections
chain=input,forward action=drop connection-state=invalid log=no log-prefix=""
18 ;;; Drop FTP Brute Forcers
chain=input action=drop protocol=tcp src-address-list=ftp_blacklist dst-port=21 log=no log-prefix=""
19 ;;; Drop SSH Brute Forcers
chain=input action=drop protocol=tcp src-address-list=ssh_blacklist dst-port=22 log=no log-prefix=""
20 ;;; Drop Everything Else
chain=input action=drop log=no log-prefix=""
Thank you so much