Community discussions

MikroTik App
 
fdrcrtl
just joined
Topic Author
Posts: 1
Joined: Fri May 22, 2020 5:39 pm

RBM33G + 2x R11e-LTE6, simultaneous LTE connections?

Fri May 22, 2020 5:46 pm

Hello, i'm pretty new to Mikrotik and I can't find any "clear" information
As a topic, with a RBM33G + 2x R11e-LTE6 can I archive 2 separate and simultaneous connections (bridging two eth to each LTE module) or it's possible only failover?

Thank you for any clarification
 
User avatar
SiB
Forum Veteran
Forum Veteran
Posts: 760
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: RBM33G + 2x R11e-LTE6, simultaneous LTE connections?

Sat May 23, 2020 10:41 pm

Hello, i'm pretty new to Mikrotik and I can't find any "clear" information
As a topic, with a RBM33G + 2x R11e-LTE6 can I archive 2 separate
YES
and simultaneous connections
YES
bridging two eth to each LTE module)
YES
or it's possible only failover?
You can setup only that.
MTCNA + MTCRE + MTCINE | ~600 users at ~150 RouterBoards in EMEA | Telegram: @SiB_PL
WinBox Tip: F6 works as ALT+TAB | Gliffy.com - free network schematic | prnt.sc - free ScreenShot software
I will be at MUMEUROPE Prague on ?? ?? 202?
 
User avatar
SiB
Forum Veteran
Forum Veteran
Posts: 760
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: RBM33G + 2x R11e-LTE6, simultaneous LTE connections?

Sun May 24, 2020 1:41 am

ROS have got bug... sometimes you must add scheduler to run every 2m this code:
if ([interface get lte2 actual-mtu ] != 1480 ) do={
  log warning "lte2 re-enable"
  system routerboard usb power-reset
  delay 5s;
  log warning "lte1 re-enable"
  interface lte disable lte1;
  interface lte enable lte1;
}
M33G or LtAP with stable v6 and lte1=LTE + lte2=LTE-US
MTCNA + MTCRE + MTCINE | ~600 users at ~150 RouterBoards in EMEA | Telegram: @SiB_PL
WinBox Tip: F6 works as ALT+TAB | Gliffy.com - free network schematic | prnt.sc - free ScreenShot software
I will be at MUMEUROPE Prague on ?? ?? 202?
 
User avatar
SiB
Forum Veteran
Forum Veteran
Posts: 760
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: RBM33G + 2x R11e-LTE6, simultaneous LTE connections?  [SOLVED]

Sun May 24, 2020 2:42 am

I really recommended to learn and do this one HowTo who have got the best way to use many WAN's at ones.
Next you can use any method netwatch/script/pcc etc to just flow the outgoing - then this is small stuff.

Bandwidth-based load-balancing with failover. This presentation also covers Mangle.
This was presented at the MUM (MikroTik User Meeting) in New Orelans, USA.
Tomas Kirnak - YouTube: https://www.youtube.com/watch?v=67Dna_ffCvc&t=1s
http://mum.mikrotik.com/presentations/US12/tomas.pdf
MTCNA + MTCRE + MTCINE | ~600 users at ~150 RouterBoards in EMEA | Telegram: @SiB_PL
WinBox Tip: F6 works as ALT+TAB | Gliffy.com - free network schematic | prnt.sc - free ScreenShot software
I will be at MUMEUROPE Prague on ?? ?? 202?

Who is online

Users browsing this forum: amt, llubik, Maggiore81, mbovenka, pe1chl and 111 guests