I have a cap ac2 connected on ether-5 on rb760igs. the cap ac2 is powered by the POE of this port (default poe setting is forced on). All was working fine
After power loss today my cap ac2 did'nt power on.
no power on poe out ether-5 on rb760igs (red led not on), but the settings on ether 5 poe show powered on
I retrieved the POE injector provided with the cap ac2 and connected it.
The cap ac2 started working.
any solution for this issue ?
Code: Select all
[admin@RBSUKASIRNAHOTSPOT] > /interface ethernet poe print
# NAME POE-OUT POE-VOLTAGE POE-PRIORITY POWER-CYCLE-PING-ENABLED POWER-CYCLE-INTERVAL
0 ether5-depan forced-on 10 no none
[admin@RBSUKASIRNAHOTSPOT] >