Consider following setup to set VLAN 802.1Q priority (PCP) = 6 for DHCP outbound packets.
Code: Select all
/interface vlan add interface=ether1 name=ether1.832 vlan-id=832
/interface bridge add fast-forward=no name=orange-832 protocol-mode=none
/interface bridge filter add action=set-priority chain=output dst-port=67 ip-protocol=udp mac-protocol=ip new-priority=6 out-interface=ether1.832 src-port=68
/interface bridge filter add action=set-priority chain=output dst-port=547 ip-protocol=udp mac-protocol=ipv6 new-priority=6 out-interface=ether1.832 src-port=546
/interface bridge port add bridge=orange-832 interface=ether1.832
/ip dhcp-client add disabled=no interface=orange-832
/ipv6 dhcp-client add add-default-route=yes interface=orange-832 pool-name=pool_orange6 request=prefix
Even simpler setup to force VLAN PCP at 6 for all traffic :
Code: Select all
/interface vlan add interface=ether1 name=ether1.832 vlan-id=832
/interface bridge add fast-forward=no name=orange-832 protocol-mode=none
/interface bridge filter add action=set-priority chain=output new-priority=6 out-interface=ether1.832
/interface bridge port add bridge=orange-832 interface=ether1.832
Thanks in advance for investigation !