Community discussions

MikroTik App
 
BriggsieNZ
just joined
Topic Author
Posts: 1
Joined: Sun Feb 28, 2021 1:51 am

css610-8g-2s+in poe to port1 no power

Tue Mar 02, 2021 10:40 am

Hi

I just bought one of these and have tried to power up the CSS610 via POE IN port1, I have tried with a Netgear ProSafe JG524PE and an Aruba InstantOn 1930 switch and cannot power up

Has anyone powered theirs up via POE IN, if anyone can shed light on this I would be grateful

Thanks
 
jookraw
Member Candidate
Member Candidate
Posts: 141
Joined: Mon Aug 19, 2019 3:06 pm

Re: css610-8g-2s+in poe to port1 no power

Tue Mar 09, 2021 5:09 pm

Hi

I just bought one of these and have tried to power up the CSS610 via POE IN port1, I have tried with a Netgear ProSafe JG524PE and an Aruba InstantOn 1930 switch and cannot power up

Has anyone powered theirs up via POE IN, if anyone can shed light on this I would be grateful

Thanks
This switch only supports Passive PoE, not PoE that is present on many switches, you may be able to find some converters.
 
Clarkyboy
just joined
Posts: 1
Joined: Tue Mar 09, 2021 9:18 pm

Re: css610-8g-2s+in poe to port1 no power

Tue Mar 09, 2021 9:23 pm

Hi,

I have successfully used this: Gigabit PoE Splitter 12V 1A... https://www.amazon.co.uk/dp/B08HS4Z7JQ? ... b_ap_share

It talks to the switch using 802.3af standard and splits it out to a gigabit link and a barrel connector for power.

I have my Microtik switch linked to a UniFi switch using 4 links, this allows the switch to be powered from one of the trunk cables.

I am also planning to use this active Poe splitter to power another switch as well as link another device via the 1Gb link.

Who is online

Users browsing this forum: No registered users and 13 guests