Community discussions

MikroTik App
 
miltont
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 59
Joined: Wed Nov 11, 2015 3:58 am

10Gb Interface

Fri Aug 06, 2021 1:47 pm

Greetings
How do you managed to get the CHR Interface recognize 10GB speed on the HYPERV?

I installed 1 Intel X540 dual 10GB PCIx card and when i bandwidth test it only reaches to almost 500Mbps and 300Mbps from CHR to other Mikrotiks that i have with 10Gb Connectivity


I have attached print screens on this message.
You do not have the required permissions to view the files attached to this post.
 
ConnyMercier
Forum Veteran
Forum Veteran
Posts: 723
Joined: Tue Dec 17, 2019 1:08 pm

Re: 10Gb Interface

Thu Aug 12, 2021 12:58 pm

Good Morning,

I would try to deactivate Auto-Negotiation on the SFP+ interface.
Testing every Speed manually (1, 2.5, 5 & 10 Gbits)
 
miltont
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 59
Joined: Wed Nov 11, 2015 3:58 am

Re: 10Gb Interface

Sat Aug 14, 2021 12:04 am

Good Morning,

I would try to deactivate Auto-Negotiation on the SFP+ interface.
Testing every Speed manually (1, 2.5, 5 & 10 Gbits)
Nope, i manually tested 100mbps, 1GB and 10Gb and had same incomplete and unknown status!
 
ConnyMercier
Forum Veteran
Forum Veteran
Posts: 723
Joined: Tue Dec 17, 2019 1:08 pm

Re: 10Gb Interface

Sat Aug 14, 2021 12:08 am

Good Evening !

retry it again, but this time also deactivate Auto-Negotiation on the hyper-V
 
miltont
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 59
Joined: Wed Nov 11, 2015 3:58 am

Re: 10Gb Interface

Sat Aug 14, 2021 12:22 am

All ports have the forced speed to 1gb or 10gb.
Good Evening !

retry it again, but this time also deactivate Auto-Negotiation on the hyper-V
 
getdunntrucking
just joined
Posts: 1
Joined: Sat Jul 25, 2020 2:44 pm

Re: 10Gb Interface

Wed Sep 01, 2021 5:35 pm

All ports have the forced speed to 1gb or 10gb.
Good Evening !

retry it again, but this time also deactivate Auto-Negotiation on the hyper-V
I'm interested to know if this solved the problem since I have the same issue
 
miltont
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 59
Joined: Wed Nov 11, 2015 3:58 am

Re: 10Gb Interface

Thu Sep 02, 2021 2:08 pm

Greetings
Installed VMWARE 6.7 and downloaded the VMK CHR File from Mikrotik
Created corresponding Virtual Switches and assigned the 10gbe Adapter.
1 PORT connected to a 10gbe port on CCR1072
Tested from CHR to a Local CCR1072 i got 9 gbps
All ports have the forced speed to 1gb or 10gb.

I'm interested to know if this solved the problem since I have the same issue

Who is online

Users browsing this forum: No registered users and 12 guests