Community discussions

MikroTik App
 
j96j
just joined
Topic Author
Posts: 1
Joined: Fri Sep 24, 2021 5:47 am

Help me (noob) setup Qbittorrent Port Forward in Winbox

Fri Sep 24, 2021 6:17 am

Note: I'm a total noob in this. I've watched youtube videos on Port Forward tutorial, but I still can't successfully port forward. I actually was able to port forward 3 years ago, but somethings happened that made the Mikrotik reset, and now I can't port forward again (forgot the steps needed).

I'm trying to port forward port (ex: 65300) in Qbittorrent. So that my PC can be connectable to others.

My IPv4 address: 192.168.88.72 [Static IP]
IPv4 DNS servers: 192.168.88.1
My WAN [Public IP] address: 4x.xxx.xxx.xxx
I have no clue which address above that I need to fill in in the rules below

Here's what I have done:
In Qbittorrent settings, set port to 65300
In Winbox:

IP - Firewall - NAT:
New NAT Rule
Chain: dstnat
dst. adress: 4x.xxx.xxx.xxx
Protocol: TCP/UDP
Dst. Port: 65300
In. Interface: bridge

ACTION:
action: dstnat
to addresses: 192.168.88.72
To Ports: 65300
I'm unsure if I should fill in Src. Address, Src. Port, Out Interface, In/Out Interface List, etc.

Please let me know what I should've done.

Thanks in advance.

Here's screenshot of my NAT rules, the ones I added are number 18 and 19. Numbers 0 - 17 are made by a technician.

Image

Also, the filter rules and connections. The technician is the one setting up the others. I'm only adding the qbt ones in NAT.
Image

Image

Who is online

Users browsing this forum: joshnielsen, phascogale and 55 guests