Community discussions

MikroTik App
 
saphir
just joined
Topic Author
Posts: 10
Joined: Sun May 02, 2021 2:37 pm

Forward all LAN traffic through Wireguard

Fri Oct 01, 2021 7:28 pm

Hello,

I do have a VPS where I configured PiVPN.
Using the configuration on my Mac/Windows/iOS it's working pretty well. I'm now trying to setup it on my Mikrotik directly to my subnet "covered" by it (192.168.1.0/24).

What I have done :

1. Created the Wireguard Interface
2. Created the peer interface
3. Checking if the Mikrotik is well connected to my VPS (which is the cast as I'm able to ping the gateway 10.6.0.1)
4. Changing my NAT masquerade rule from my outgoing Interface (PPPoE) to my Wireguard Interface to forward all my Internet traffic through this Interface

However it seems I'm unable to correcly browse the Internet and traffic is pretty low (RX/TX).

Here is my configuration export : https://pastebin.com/j9gbbFs7

This setup is to replace an existing IPSec/IKEv2 configuration which is currently disabled during these tests.

Is there anything I should have a look ?

Thank you for your help.
Yann

Who is online

Users browsing this forum: No registered users and 21 guests