Community discussions

MikroTik App
 
stollerxd
just joined
Topic Author
Posts: 9
Joined: Tue Jan 15, 2019 12:33 pm

PTP BETWEEN LHG5 AND DYNADISH 5

Mon Oct 04, 2021 4:26 pm

Hi all,

I try to make PTP link between LHG5 and DYNADISH 5 but it doesn't working. Any advice to give me.

PS: I use Dynadish like bridge( ap bridge not working due to ROS license level) and lhg5 like station bridge.
 
pe1chl
Forum Guru
Forum Guru
Posts: 10186
Joined: Mon Jun 08, 2015 12:09 pm

Re: PTP BETWEEN LHG5 AND DYNADISH 5

Mon Oct 04, 2021 5:29 pm

It should work. Did you ever make a link before?
Check that the wireless settings on each end are compatible.
 
Rugx
Member Candidate
Member Candidate
Posts: 123
Joined: Thu Jan 02, 2020 1:44 pm

Re: PTP BETWEEN LHG5 AND DYNADISH 5

Tue Oct 05, 2021 11:22 am

Does you station-bridge see the the bridge through wireless scan?
 
stollerxd
just joined
Topic Author
Posts: 9
Joined: Tue Jan 15, 2019 12:33 pm

Re: PTP BETWEEN LHG5 AND DYNADISH 5

Tue Oct 05, 2021 7:44 pm

It should work. Did you ever make a link before?
Check that the wireless settings on each end are compatible.
Hi thanks for reply.

Yes i've already make a link on past. Between two same antenna (LHG-LGH, QRT-QRT or QRT-QRT).
But never do it with different antenna
 
stollerxd
just joined
Topic Author
Posts: 9
Joined: Tue Jan 15, 2019 12:33 pm

Re: PTP BETWEEN LHG5 AND DYNADISH 5

Tue Oct 05, 2021 7:46 pm

Does you station-bridge see the the bridge through wireless scan?
Hi,

Sadly no.
 
pe1chl
Forum Guru
Forum Guru
Posts: 10186
Joined: Mon Jun 08, 2015 12:09 pm

Re: PTP BETWEEN LHG5 AND DYNADISH 5

Tue Oct 05, 2021 8:02 pm

Make sure you use the settings that were successful for you, but are compatible with both devices.
 
User avatar
soulflyhigh
Member Candidate
Member Candidate
Posts: 179
Joined: Wed Sep 08, 2010 11:20 am

Re: PTP BETWEEN LHG5 AND DYNADISH 5

Wed Oct 06, 2021 7:47 pm

That should work just fine, could you post WLAN config's export from both devices?
The link is either misconfigured or there are some hardware-related issues.
Regards,
M.
 
stollerxd
just joined
Topic Author
Posts: 9
Joined: Tue Jan 15, 2019 12:33 pm

Re: PTP BETWEEN LHG5 AND DYNADISH 5

Thu Oct 07, 2021 2:56 pm

That should work just fine, could you post WLAN config's export from both devices?
The link is either misconfigured or there are some hardware-related issues.
Regards,
M.
Hello,
MASTER CONFIG

interface wireless
set [ find default-name=wlan1 ] antenna-gain=0 band=5ghz-a/n country=no_country_set \
disabled=no frequency=5440 frequency-mode=superchannel mode=bridge radio-name=\
DYNADISH-MASTER scan-list=5400-5600 ssid=FAUCO0021 station-roaming=enabled \
wireless-protocol=802.11

SLAVE CONFIG

interface wireless
set [ find default-name=wlan1 ] antenna-gain=0 band=5ghz-a/n country=no_country_set \
disabled=no frequency=5440 frequency-mode=superchannel mode=statiojn-bridge radio-name=\
LHG5-SLAVE scan-list=5400-5600 ssid=FAUCO0021 station-roaming=enabled \
wireless-protocol=802.11

Who is online

Users browsing this forum: Google [Bot], JohnTRIVOLTA, kid, TheCondor and 33 guests