I'm setting up a few devices on a 192.168.x.x network behind a Hex S. I'm "mapping" some of those devices onto a 10.x.x.x network via 1:1 NAT. All but one of the devices works great this way. The device that does not seem to be working will reply to pings from the 192.x.x.x network but once you get over to the 10.x.x.x network you get nothing back. The device in question is on 192.168.0.10 / 10.84.50.236. I've tried replacing the 192.x.x.x address in some of the other rules that work fine but it still does not work. Any tips on this issue i would greatly appreciate it.