Community discussions

MikroTik App
just joined
Topic Author
Posts: 2
Joined: Thu Oct 07, 2021 10:02 am


Thu Oct 07, 2021 10:10 am

Im using MikroTik RBLHGR&R11E-LTE6
With provider: Orange 26003
in this location: ... 5883?hl=pl
Map with BTS: ... pe=roadmap

Device strongly keeps BTS:
eNB ID 162087
I would like to be connected to different BTS:
eNB ID 162365
because it's closer and I hope to reach better performance
is there any way to achive that?
User avatar
Forum Guru
Forum Guru
Posts: 1800
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: Cat6 LGH LTE

Fri Oct 08, 2021 10:25 pm

About map with BTS we have perfect this one:

About Tower/BTS/eNB Lock you must do a Cell Lock feature who is describe in documentation: ... _Cell_lock

If you want connecto to e.g. earfcn=1234 and phy-cell-id=56 then command
interface lte at-chat lte1 input="at*cell=2,3,,1234,56"
lock you to proper Tower and proper antenna on it.

To disable , means came back to not-lock working you set 0 by:
interface lte at-chat lte1 input="at*cell=0"

This is all magic.
MTCNA + MTCRE + MTCINE | ~800 users at ~150 RouterBoards in EMEA
Knowledge Base about LTE by SiB | Buy me a caffe | Telegram:
just joined
Topic Author
Posts: 2
Joined: Thu Oct 07, 2021 10:02 am

Re: Cat6 LGH LTE

Mon Oct 11, 2021 11:10 am

Thank You SiB, is missing eNB ID 162365
Tip: factory reset doesnt erase 'at-chat' settings ! :shock:

this is very usefull than /interface lte at-chat lte1 input="at*cell=0"

BTW, i put my antena into passthrough mode - now Mikrotik CRS is my main router
Device received public IP Address and everything works fine.. except... i cannot reach antena now :)
is there any way to get connected to antena without factory reset?

Who is online

Users browsing this forum: No registered users and 11 guests