The RoS is the latest stable, firmware upgraded. I set the AP up as a bare minimum, disabled 2.4 and tested the hell out of it. - My testing machines are one iMac, MacBook pro and an iPhone. They all have more or less identical results doing speed transfers.
I used SpeedTest application, on a 200 mbps link, and I have router modem on 5 Ghz built in which throughputs full link speed.
My CAP ac won't pass through more than about 80-90 mbps whatever I did to it. I changed frequencies, channel widths, and played with settings. I even turned on e Tx chain for testing and the speed was about the same. It is like something is stuck somewhere and I can't find it.
To make matters worse, I have established link speeds both on computer and MikroTik internally displaying high negotiated speeds, while crawling when testing. - I also did file-copy testing from fileserver and direct cable connectio to check link. - The AP is connected with 1 GBPS link to my 3011 testing router.
Here is the config I also sent to MikroTik and other images. (I tried myriad of settings, WMM enabled, rts cts enable, ANI enabled, you name it.)
I also asked all around and it is like this issue just happens to me? I did test another CAP ac today at work and it was the same. Transmit speeds are slow.
Code: Select all
/interface bridge
add name=bridgeLocal
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode band=2ghz-onlyn basic-rates-a/g=12Mbps basic-rates-b="" country=croatia distance=indoors frequency=2472 \
installation=indoor mode=bridge rate-set=configured ssid=MikroTik supported-rates-a/g=12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps supported-rates-b="" wps-mode=disabled
set [ find default-name=wlan2 ] band=5ghz-onlyac basic-rates-a/g=12Mbps,24Mbps channel-width=20/40mhz-Ce disabled=no distance=indoors installation=indoor mode=ap-bridge rate-set=\
configured ssid=MikroTik supported-rates-a/g=12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps wireless-protocol=802.11
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/interface bridge port
add bridge=bridgeLocal comment=defconf interface=ether1
add bridge=bridgeLocal comment=defconf interface=ether2
add bridge=bridgeLocal interface=all
/ip dhcp-client
add comment=defconf disabled=no interface=bridgeLocal
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www disabled=yes
set api disabled=yes
set api-ssl disabled=yes
/system identity
set name="AP"
/tool mac-server
set allowed-interface-list=none