Community discussions

MikroTik App
 
bfanguy
just joined
Topic Author
Posts: 8
Joined: Tue Apr 24, 2012 9:18 pm

Network Links show ? for TX and RX

Tue Oct 12, 2021 11:14 pm

RouterOS 6.48.2 on hEX S

We have ~100 links between devices using snmp v3 to display the TX/RX Mbps.
~25% show Rx ? Tx ?, but if you look at the device, snmp the interface shows the Rx and Tx Mbps.
Any idea why they are not showing correctly on the map?

Any Help is greatly appreciated.
 
bfanguy
just joined
Topic Author
Posts: 8
Joined: Tue Apr 24, 2012 9:18 pm

Re: Network Links show ? for TX and RX

Wed Oct 13, 2021 12:20 am

version: 6.48.2 (stable)
build-time: Apr/09/2021 10:17:26
factory-software: 6.46.4
free-memory: 173.3MiB
total-memory: 256.0MiB
cpu: MIPS 1004Kc V2.15
cpu-count: 4
cpu-frequency: 880MHz
cpu-load: 29%
free-hdd-space: 20.0KiB
total-hdd-space: 16.3MiB
write-sect-since-reboot: 943
write-sect-total: 93512
bad-blocks: 0%
architecture-name: mmips
board-name: hEX S
platform: MikroTik
 
bfanguy
just joined
Topic Author
Posts: 8
Joined: Tue Apr 24, 2012 9:18 pm

Re: Network Links show ? for TX and RX

Wed Oct 13, 2021 12:41 am

took a screen shot of the network map.
rebooted the router.
check to see if the same links showed the ? marks.
24 were the same - showing ? marks, 17 changed to no longer showing ? marks or now showing ? marks.

Who is online

Users browsing this forum: No registered users and 4 guests