so I finally made the leap of faith. I decided to replace my usg-pro-4 with an rb5009 instead of loosing more hair over ubiquity firewalls. Use is SOHO plus one tenant on isolated vlan. No previous MT experience.
I moved my WAN2 (dual stack dsl, modem draytec vigor 130 doing the vlan tagging) from the usg to ether1 on the rb5009. Connected my computer on ether2, nothing else. I cannot for the life of me get the rb5009 to connect as pppoe-client, always ending up with the same symptoms. Connecting, terminating, disconnected loop. Sometimes terminating... -disconnected, sometimes terminating... hungup.
First I followed the MT help > getting started to the word. Upgraded to ROS 7.1rc4. Tried the default settings. Various other stabs in the dark. Tried a lot of different settings in the pppoe-out interface.
For the sake of it a very minimalistic setup:
Code: Select all
export hide-sensitive
# jan/02/1970 00:03:56 by RouterOS 7.1rc4
# software id = NKBZ-YWFF
#
# model = RB5009UG+S+
# serial number = xxx
/interface pppoe-client
add add-default-route=yes interface=ether1 name=pppoe-out1 use-peer-dns=yes \
user=H1und1/xxx@online.de
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip address
add address=10.0.0.1/24 interface=ether2 network=10.0.0.0
/system logging
add topics=pppoe
/system routerboard settings
set cpu-frequency=auto
The usg can connect via pppoe with the modem as is, on the same credentials:
Sorry for yet another amateur on here, I realise I'm not in the usual MT demographics. Even more, any help will be highly appreciated.