I have a Mikrotik951Ui and would like to configure two VLANS to be broadcasted on ONE Unifi AP.
On the Mikrotik, Ether1 is dedicated for WAN through DHCP.
I have created two VLANS 10 and 20 with their respective IPs and DHCP server. Both VLANS are on ether2 as Trunk Port. I have created a bridge on the Mikrotik and added port 2 to the Bridge. NAT is also configured.
On the Unifi Settings-Network menu, I created two Networks for VLANS 10 and 20. On the Wireless Network Tab, I created two wireless networks and linked them to VLANS 10 and 20 Network.
My problem is that as soon as I connect the Unifi on the trunk port of the Mikrotik, the SSIDs would not broadcast. The Unifi AP also gets disconnected on the Controller with this setup and does not show up.
When I reset the RB951 and just configure it without VLANS (flat network), the Unifi would adopt and work. What am missing in the configs? Anyone who could just help get the configs right. Thanks for help..