To make things right I want to follow the often cited RIPE BCOP: https://www.ripe.net/publications/docs/ripe-690
Following the previous document I need to provide the CPEs with an address for the WAN (PPPoE in my case) taken from a dedicated pool and the customer delegated prefix.
So far I have been able to provide the delegated prefix and use one of the /64s from that prefix as a WAN address.
Do any of you have been able to provide the delegated prefix while assigning a different WAN address from a dedicated pool?
Here is my CPE config now:
Code: Select all
/interface pppoe-client
add add-default-route=yes disabled=no interface=ether1 max-mru=1492 max-mtu=1492 name=pppoe-out1 password=test user=testuser2
/ipv6 dhcp-client
add add-default-route=yes interface=pppoe-out1 pool-name=client-v6 request=prefix
/ipv6 address
add from-pool=client-v6 interface=bridge-lan