Community discussions

MikroTik App
 
LynxG
just joined
Topic Author
Posts: 1
Joined: Thu Oct 28, 2021 11:57 am

Public IP mapping on two networks

Thu Oct 28, 2021 1:52 pm

Hi everyone? New here and a beginner in Mikrotiks. I have a WAN that I have failed to configure public IPs on 1st network despite try different NAT rules, port forwarding, etc.
I have been issued with a gateway together with 5 public addresses from my ISP, I have configured router 1 and can access it outside the LAN. From the bridge , I have 2 access points (one on local address other on public) and an IP camera. I have PTP to the second network where router 2 is on Public IP on local network address and accessible outside the LAN, I can also access the other devices including the station of the PTP from the LAN and also outside the LAN. My problem is, I cannot access any device from the 1st network either through my 2nd LAN or outside it despite mapping the devices with the public IPs? See attached illustration for better understanding my issue. I would appreciate help on NAT or any way to access them, I need to do some configurations and the networks are miles apart. Thank you.

Who is online

Users browsing this forum: BioMax, cdblue and 50 guests