Community discussions

MikroTik App
 
KasterBlaster
newbie
Topic Author
Posts: 27
Joined: Mon Jan 16, 2017 11:17 am

Torch Tool

Fri Nov 05, 2021 11:30 am

Hello,
on one of the interfaces in Mikrotik I have increased network traffic, when I choose the tool Torch ,Tx rate in all displayed connections is 0 bytes and Rx rate shows the flows, does anyone know to explain why this happens and if I'm wrong somewhere?

selected parameters within the Torch tool:
src address
dst adress
port
protocol

Winbox(64bit) v6.47.1
RB3011UiAS
 
Zacharias
Forum Guru
Forum Guru
Posts: 3459
Joined: Tue Dec 12, 2017 12:58 am
Location: Greece

Re: Torch Tool

Fri Nov 05, 2021 7:14 pm

What is the protocol ?
 
KasterBlaster
newbie
Topic Author
Posts: 27
Joined: Mon Jan 16, 2017 11:17 am

Re: Torch Tool

Mon Nov 08, 2021 9:52 am

Hello,
protocols and ports are left to ANY, deafult option in Torch Tool
 
Zacharias
Forum Guru
Forum Guru
Posts: 3459
Joined: Tue Dec 12, 2017 12:58 am
Location: Greece

Re: Torch Tool

Tue Nov 09, 2021 7:55 pm

Is the Interface you try to monitor, Hardware Offloaded ?
If that's the case, packets processed by a Hardware Offloaded Bridge will not be visible through Torch, except some unicast, multicast and broadcast traffic ...
 
KasterBlaster
newbie
Topic Author
Posts: 27
Joined: Mon Jan 16, 2017 11:17 am

Re: Torch Tool

Wed Nov 10, 2021 2:19 pm

Hello,
Yes, this interface is hardware offloaded, thanks
 
Zacharias
Forum Guru
Forum Guru
Posts: 3459
Joined: Tue Dec 12, 2017 12:58 am
Location: Greece

Re: Torch Tool

Wed Nov 10, 2021 4:46 pm

Ok... Then that's the reason...
You can also take a look here :
https://help.mikrotik.com/docs/display/ ... l%20rules.

Who is online

Users browsing this forum: Bing [Bot] and 77 guests