Community discussions

MikroTik App
 
DubaiDrift
just joined
Topic Author
Posts: 5
Joined: Fri Nov 05, 2021 10:01 pm

Shelly on RB2011UiAS-2HnD

Fri Nov 05, 2021 10:10 pm

Hi MikroTikers!

I own a RB2011UiAS-2HnD with another cAP AC configured via Capsman.
I now bought a set of shelly Smart Home Sockets and wanted to run these with a home assistant server. However, i am having problems getting these shelly plugs connected in the wifi properly.
Even though I see one of the shelly devices in the DHCP Server Lease tab, i cannot access the webserver of the device under the ip adress. Also Shellys own app can detect the devices nor can the home assistant.

I found an information from shelly:

2. Disable WMM and IGMP in the Router
An article linked to this post https://www.facebook.com/groups/ShellyI ... 714150379/ details reasons why WMM and IGMP might not be good for WiFi-connected home automation devices. Many routers have them enabled by default.

Where can i find these settings in the webfig? As i am on Ubuntu, I am not using Winbox.

Thanks, Matt
 
DubaiDrift
just joined
Topic Author
Posts: 5
Joined: Fri Nov 05, 2021 10:01 pm

Re: Shelly on RB2011UiAS-2HnD

Sat Nov 06, 2021 5:18 pm

Hi there. Also other advice on using a shelly smart home setup with a mikrotik Wifi would be appreciated.

Who is online

Users browsing this forum: ips, jpitgirona and 30 guests