Hi MirktoTikers,

not sure what hapened, I posted this topic already yesterday, but it completely disappeared?! Please let m know if something is wrong with the thread.

I run a RB2011UiAS-2HnD with two cAP ac managed via CapsMan. Its been set up with the tutorial in Wiki a while ago.

I now purchased a set of shelly smart home device and have massive problems accessig them. They are assigned an IP adress via DHCP. I can see one unit in the DHCP server leases. However, I cannot access the device on this IP adress, nor can the shelly app discover the device in the wifi network.

I found the following information from shelly:

https://www.facebook.com/notes/shelly-s ... 230663294/

"2. Disable WMM and IGMP in the Router
An article linked to this post https://www.facebook.com/groups/ShellyI ... 714150379/ details reasons why WMM and IGMP might not be good for WiFi-connected home automation devices. Many routers have them enabled by default."

I cant find the IGMP or WMM settings in the webfig? Is there someone who can guide me there?

Anyone running a shelly smarthome setup under router OS and can help me with appropriate wifi settings?

Many thanks in advance!!!

Matt

I solved the problem now and have my Shelly devices working:

you need to enable AES Encryption and Client to Client Forwarding in the Capsman config.

Thanks,
Matt