Why is it so difficult to manage VLAN's with routeros ?
Taken an example from Zyxel attached, way easier.
This isn't that much harder with RouterOS. Here is the equivalent:Taken an example from Zyxel attached, way easier.
/interface bridge port
add bridge=bridge interface=ether1 pvid=640
add bridge=bridge interface=ether2 pvid=2
add bridge=bridge interface=ether3 pvid=10
add bridge=bridge interface=ether4 pvid=10
add bridge=bridge interface=ether5 pvid=12
add bridge=bridge interface=ether6 pvid=12
add bridge=bridge interface=ether7 pvid=12
add bridge=bridge interface=ether8 pvid=12
add bridge=bridge interface=ether9 pvid=10
add bridge=bridge interface=ether10 pvid=10
add bridge=bridge interface=ether11 pvid=2
add bridge=bridge interface=ether12 pvid=2
/interface bridge vlan
add bridge=bridge tagged=ether2,ether12 vlan-ids=10
add bridge=bridge tagged=ether12 vlan-ids=12
add bridge=bridge tagged=ether11,ether12 vlan-ids=300
add bridge=bridge tagged=ether2 vlan-ids=640