Hi,
I try to setup a simple MSTP and it works not as expected.
I have set-up two router with the same VLANs (11 and 21) and created a MSTP instance.
Root:
The salve bridge behaves as expected:
So far everything works as expected, VLAN 11 and 21 go through ether4.
Now I want VLAN11 to go through ether4 and VLAN21 through ether5.
I edit the port priority of the root bridge as follwing:
ether4 = ID11 = VLAN11 = 70
ether4 = ID21 = VLAN21 = 80
ether5 = ID11 = VLAN11 = 80
ether5 = ID21 = VLAN21 = 70
THE RPOBLEM: The slave bridge ignores the priority setting of the root-bridge:
Everything still goes through ether4.
What do I wrong??