PC1 - RBM33G - RB450G - Cisco 2950 - PC2
PC1:
Ethernet: 192.168.100.200/24 - Gateway: 192.168.100.1
RBM33G:
Ether1 and Ether2 under Bridge1
Bridge1: 192.168.100.1/24
RB450G:
Ether1 under VLAN60
VLAN60: 10.0.60.1/24 + DHCP Server
Ether2: 192.168.100.2/24
Cisco 2950:
Ether1: Mode trunk
Ether2: Mode access VLAN60
PC2:
Ethernet: 10.0.60.254 (DHCP)
Configs:
Cisco:
RB450G:version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Switch
!
!
ip subnet-zero
!
!
spanning-tree mode pvst
no spanning-tree optimize bpdu transmission
spanning-tree extend system-id
!
!
!
!
interface FastEthernet0/1
switchport trunk native vlan 100
switchport trunk allowed vlan 1,60,100
switchport mode trunk
!
interface FastEthernet0/2
switchport access vlan 60
switchport mode access
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
!
interface FastEthernet0/10
!
interface FastEthernet0/11
!
interface FastEthernet0/12
!
interface FastEthernet0/13
!
interface FastEthernet0/14
!
interface FastEthernet0/15
!
interface FastEthernet0/16
!
interface FastEthernet0/17
!
interface FastEthernet0/18
!
interface FastEthernet0/19
!
interface FastEthernet0/20
!
interface FastEthernet0/21
!
interface FastEthernet0/22
!
interface FastEthernet0/23
!
interface FastEthernet0/24
switchport mode trunk
!
interface Vlan1
no ip address
no ip route-cache
shutdown
!
interface Vlan100
ip address 10.0.100.101 255.255.255.0
no ip route-cache
!
ip default-gateway 10.0.100.1
ip http server
!
line con 0
line vty 0 4
login
line vty 5 15
login
!
!
end
RBM33G:/interface ethernet
set [ find default-name=ether2 ] name=ether2-Telefonia
/interface vlan
add interface=ether1 name=vlan60 vlan-id=60
add interface=ether5 name=vlan100 vlan-id=100
/ip pool
add name=dhcp_pool1 ranges=10.0.60.2-10.0.60.254
/ip dhcp-server
add address-pool=dhcp_pool1 disabled=no interface=vlan60 name=dhcp2
/ip address
add address=10.0.60.1/24 interface=vlan60 network=10.0.60.0
add address=192.168.100.2/24 interface=ether2-Telefonia network=192.168.100.0
add address=10.0.100.1/24 interface=vlan100 network=10.0.100.0
/ip dhcp-server network
add address=10.0.60.0/24 gateway=10.0.60.1
/ip dns
set servers=8.8.8.8,8.8.4.4
Regards./interface bridge
add name=bridge1
/interface bridge port
add bridge=bridge1 interface=ether1
add bridge=bridge1 interface=ether2
/ip address
add address=192.168.100.1/24 interface=bridge1 network=192.168.100.0
/ip dns
set servers=8.8.8.8,8.8.4.4