Hello.
At the ip arp print, I have dynamic entries, from dhcp, and static.
My question is, how to filter and remove ONLY ONE static entry using one command
/ip arp print
# ADDRESS MAC-ADDRESS INTERFACE
0 DC 192.168.178.25 CA:25:07:F3:C9:A6 ether1
1 DC 192.168.178.26 CA:25:07:F3:C9:A7 ether1
2 DC 192.168.178.27 CA:25:07:F3:C9:A8 ether1
n DC 192.168.178.29 CA:25:07:F3:C9:A9 ether1
/ip arp remove numbers=2
/ip arp remove [find address=192.168.88.66]
/ip arp remove [find mac-address=CA:25:07:F3:C9:A8]
/ip arp remove [find interface=ether1]